|
Tube
Various single-layer tubes as well as multi-layer tubes (2 layers, 3 layers, 4 layers and 5 layers). What we have at present generally include the following (Ф16, Ф19, Ф22, Ф25, Ф30, Ф35, Ф38, Ф40, Ф45, Ф50, Ф55, Ф60; Capacity: 5ml-400ml). |
|
Moulded Vial |
1, 10ml Total Height: 53.5mm TOL. +0.50mm, -0.60mm
OD of body: 25.4mm +0.35mm, -0.40mm
OD of lip: 20mm +0.10mm, -0.30mm
ID of lip: 12.6mm +/-0.20mm
OD of neck: ≤17.0mm
ID of neck: ≥11.5mm
Finish Height: 4.2mm +/-0.20mm
Thickness of bott 3mm +1.0mm, -1.50mm
Overflow capacity(ml): ≈15.0
Mass(g): ≥18.5
|
2, 15ml Total Height: 58.8mm TOL. +0.50mm, -0.60mm
OD of body: 26.5mm +0.35mm, -0.40mm
OD of lip: 20mm +0.10mm, -0.30mm
ID of lip: 12.6mm +/-0.20mm
OD of neck: ≤17.0mm
ID of neck: ≥11.5mm
Finish Height: 4.2mm +/-0.20mm
Thickness of bott 3mm +1.0mm, -1.50mm
Overflow capacity(ml): ≈17
Mass(g): ≥22.0
|
3, 20ml Total Height: 58.0mm TOL. +0.50mm, -0.60mm
OD of body: 32mm +0.35mm, -0.40mm
OD of lip: 20mm +0.10mm, -0.30mm
ID of lip: 12.6mm +/-0.20mm
OD of neck: ≤17.0mm
ID of neck: ≥11.5mm
Finish Height: 4.2mm +/-0.20mm
Thickness of bott 3mm +/-1.50mm
Overflow capacity(ml): ≈26.0
Mass(g): ≥26.5 |
|
|
|
|
管制瓶 |
1, 10ml Total Height: 9.7mm TOL. +/-0.70mm
OD of body: 22mm +/-0.35mm
OD of lip: 19.6mm +0.30mm, -0.35mm
ID of lip: 12.5mm +0.3omm,-0.20mm
OD of neck: ≤16.0mm +/-0.50mm
ID of neck: 12.5mm +0.3omm,-0.20mm
Finish Height : 3.5mm +/-0.30mm
Thickness of bottom : ≥0.5mm Thickness of body 1 .1mm, +/-0.06mm
Overflow capacity (ml): ≈ 13.5ml |
2, 15ml 总高度: 55mm TOL. +/-0.70mm
OD of body: 25.3mm +/-0.35mm
OD of lip: 19.6mm +0.30mm, -0.35mm
ID of lip: 12.5mm +0.3omm,-0.20mm
OD of neck: ≤16.0mm +/-0.50mm
ID of neck: 12.5mm +0.3omm,-0.20mm
Finish Height: 3.5mm +/-0.30mm
Thickness of bottom: ≥0.5mm Thickness of body 1 .1mm, +/-0.06mm
Overflow capacity (ml): ≈19.0ml |
3, 20ml Total Height: 58mm TOL. +/-0.70mm
OD of body: 27.6mm +/-0.45mm
OD of lip: 19.6mm +0.30mm, -0.35mm
ID of lip:: 12.5mm +0.3omm,-0.20mm
OD of neck ≤16.0mm +/-0.50mm
ID of neck: 12.5mm +0.3omm,-0.20mm
Finish Height: .2mm +/-0.30mm
Thickness of bottom: ≥0.5mm Thickness of body 1 .15mm, +/-0.05mm
Overflow capacity(ml): ≈25ml |
|
|
Ampoule |
Specification
(ml) |
Outer Dia. |
Deviation Limit |
Constriction |
Olive |
Stem |
Total
height |
Thickness
of stem |
Base |
Volume |
1ml |
10.0 |
+/-0.26 |
6.3 |
7.8 |
5.0 |
60.0 |
Mim0.2 |
0.2 |
1.5 |
2ml |
11.5 |
+/-0.26 |
7.0 |
8.5 |
5.5 |
70.0 |
Mim0.2 |
0.2 |
2.9 |
5ml |
16.0 |
+/-0.30 |
8.2 |
10.0 |
6.0 |
87.0 |
Mim0.2 |
0.3 |
6.8 |
|
|
|
Capsule
0#, 1#, 2#, 3#, 4#
|
Vcaps capsules, gelatin capsules and liquids or semi-solids capsules.
|
|
|
Specification: |
|
Diameter of the cap: |
20mm |
R of vertical upper corner of the cap: |
1.2 mm |
Total height: |
7mm |
R of out egde of the cap: |
10mm |
R of inner edge of the cap: |
5mm |
|
|
Specification: |
|
Diameter of the top part: |
19.5mm, +/-0.2mm |
Thickness of the yop part: |
3mm, +/-0.25mm |
Diameter of the plug stem: |
13mm, +/-0.1mm |
Total height: |
8.7mm, +/-0.3mm |
|
|
Eyedrop Bottles
Various Specification of National Standard or International Standard plastic Eyedrop bottles. |
|
|
|
|
|
|