Products>Solid
Spray Dryer |
Dual Cone Gyro Type Vacuum Drier |
Vacuum Drying Machine |
High Efficient Fluid-ebd Dryer |
Fluid-bed Dryer |
Fluid-bed Granulator (One-step Granulator) |
Fluid-bed Dryer |
Automatic High-speed Tablet Press |
Products>Solid>Dryer
Spray Dryer |
Dual Cone Gyro Type Vacuum Drier |
Vacuum Drying Machine |
High Efficient Fluid-ebd Dryer |
Fluid-bed Dryer |
Fluid-bed Granulator (One-step Granulator) |
Fluid-bed Dryer |
Products>Solid>Tablet Press Machine>
Automatic High-speed Tablet Press |
Automatic Triple Rotary High Speed Tablet Press Machine |
Automatic High-speed double-sided Tablet Press |
Rotary Tablet Press Machine |
Products>Solid>Sieving Machine>
Vibrating Screener |
Vibration Sifting Machine |
Products>Solid>Coating Machine>
High-efficiency Coating Machine |
High-efficiency Poreless Coating Machine |
Products>Solid>Granulator>
Wet Mixing Granulator |
Automatic High-Effective Mixing and Granulating Machine |
Intellectualized Fully Automatic High-Efficiency Mixing Granulator/SUPERMIXER |
Roll Compactor |
Products>Solid>Pulverizer>
Grinding and Granulating Machine |
High Efficient Mill |
Air-Cooled Crusher |
Mini-Efficient Pulveriger |
Mini-Efficient Pulveriger |
Products>Solid>Mixer>
Products>Solid>Blender>
Multi-directional Motions Mixer |
Double Cone_shaped Mixer |
Hopper Type Mixer |
Products>Solid>Power Fillng Machine>
Products>Solid>Capsule Filling Machine>
Semi-automatic Capsule Filling Machine |
Products>Liquid
Plastic Bottle Compact Line For Washing, Filling And Sealing |
Oral liquid Compact Line For Cleaning, Sterilizing, Drying, Filling And Sealing |
Eyedrop Filling Machine |
Large Capacity Refrigerated Centrifuge |
High-Speed Refrigerated Centrifuge |
Products>Liquid>Agitation and Holding Tanks>
Products>Liquid>Filling Machine>
Plastic Bottle Compact Line For Washing, Filling And Sealing |
Oral liquid Compact Line For Cleaning, Sterilizing, Drying, Filling And |
Eyedrop Filling Machine |
Products>Liquid>Centrifugal Machine>
Large Capacity Refrigerated Centrifuge |
High-Speed Refrigerated Centrifuge |
Products>Packing Machine
Vertical Sticky Labeling Machine For Small Round Bottle |
Vertical Labeler For Round Bottle |
Multifunctional Automatic Cartoner |
Multifunctional Automatic Cartoner |
Carton Sealer |
Strapping Machine |
Products>Packing Machine>Labelling Machine>
Automatic Cold Glue Labling Machine |
Vertical Sticky Labeling Machine |
Vertical Sticky Labeling Machine For Small Round Bottle |
Vertical Labeler For Round Bottle |
Labeler with tray inserter |
Products>Packing Machine>Cartoning Machine>
Multifunctional Automatic Cartoner |
Multifunctional Automatic Cartoner |
Multifunctional Automatic Cartoner |
Automatic horizontal cartooning machine |
Automatic vertical cartooning machine |
Products>Packing Machine>Bunding Machine>
Strapping Machine |
Strapping Machine |
Carton Sealer |
Strapping Machine |
Carton Sealer |
Products>Packing Machine>Sealing Machine>
Induction Aluminum Foil Sealing Machine |
Induction Aluminum Foil Sealing Machine |
Solid Ink Coding Continuous Band Sealer |
Plastic Film Continuous Sealing Machine |
Products>Packing Machine>Folding Machine>
Automatic Folding Machine |
Automatic Folding Machine |
Automatic Paper Folding Machine |
Automatic Paper Folding Machine |
Products>Packing Machine>Capping Machine>
capping machine |
Star-plate Automatic Capper |
CAPPING MACHINE |
CAPPING MACHINE |
CAPPING MACHINE |
GA semi-automatic capping machine |
Products>Packing Machine>Packaging Machine>
Automatic Double-side Aluminum Foil Packing Machine |
Blister Packaging Machine |
Microcomputer Packaging Machine |
Products>Packing Machine>Weight Checking Machine>
Products>Semisolid
GMP-SSM-001 Set of equipments of cream vacuum emulsification |
Ointment or liquid filling, capping machine series |
Products>Semisolid>Emulsifiers>
GMP-SSM-001 Set of equipments of cream vacuum emulsification |
Products>Semisolid>Tube Filling Machine>
Ointment or liquid filling, capping machine series |
Products>实验室设备
Tablet friability tester |
Melting point tester |
Fast moisture tester |
tablet four-usage tester |
Products>Reserch and Development>Tester
Tablet hardness tester |
Dissolution tester |
Disintegration tester |
Tablet friability tester |
Melting point tester |
Fast moisture tester |
tablet four-usage tester |
Products>Reserch and Development>
Products>Reserch and Development>
Products>Sterile
LyoUltra Series |
LyoBasic Lyophilizer |
BOTTLE WASHING MACHINE |
BOTTLE WASHING MACHINE |
Rapid Cooling Sterilizer |
Multtifuonal Chinese Medicine Sterilizer |
Ampoule Leak Sterilizer |
Products>Sterile>Lyophilizer
LyoUltra Series |
LyoBasic Lyophilizer |
Products>Sterile>Bottle Washing Machine
BOTTLE WASHING MACHINE |
BOTTLE WASHING MACHINE |
Products>Sterile>Sterilizer
Rapid Cooling Sterilizer |
Multtifuonal Chinese Medicine Sterilizer |
Ampoule Leak Sterilizer |
Products>Water Treatment
Purified water system |
Multi-effect water distiller |
Multi-effect distillation |
Products>Water Treatment>Pure Water Treatment
Purified water system |
Products>Water Treatment>Filtration
Products>Water Treatment>Distillation
Multi-effect water distiller |
Multi-effect distillation |
Products>Other
Products>Panel
Products>Panel>Connecting Profile
Code |
English Name |
Picture |
Drawing |
PP01 |
Internal corner(single piece) |
|
|
PP02 |
Internal corner(casting piece) |
||
PP03 |
External corner(single piece) |
|
|
PP04 |
External corner(casting piece) |
|
|
PP05 |
External pillar |
||
PP06 |
Coving for wall to wall Wall to ceiling Ceiling to ceiling |
||
PP07 |
One way base runner |
||
PP08 |
Two way base runner |
|
|
PP09 |
Aluminum /GI BASE RUNER |
|
|
PP10 |
Door end cap(Casting piece) |
|
|
PP11 |
Door seal(single piece) |
|
|
PP12 |
Z profile |
||
PP13 |
View Panel Profile |
|
|
PP14 |
Box type false ceiling connecting profile |
|
|
PP15 |
Type Profile For Wall |
|
|
PP16 |
Type Profile For Ceiling |
|
|
PP17 |
Door Profile |
|
Products>Panel>Panel Type
Series Number |
English Name |
Picture |
1 |
Tongue and Groove(one side) type panel (GI profile) Manual made |
|
2 |
Tongue and Groove(one side) type panel (Aluminum Profile) |
|
3 |
Tongue and Groovetype panel Ceiling Panel Manual made |
|
4 |
Groove and Groove type of Panel (GI profile) Ceiling Panel Manual made |
|
5 |
Enhanced type G.I. Profile type Manual made |
|
6 |
Enhanced type Aluminum Profile type Manual made |
|
7 |
Tongue and Groove type of panel (two side 0.5mm steel strip) Machine made |
Products>Engineering Service
Professional design is the guarantee of successful production, and a good conception design is the basestone. Rely on good relationship with pharmaceutical institute, we have enough experience on mutual cooperation. In field of engineering construction, we can provide project-undertaken project in core part, which for restricting the investment within reasonable range on pacing on quality and period, turn-key project is also welcomed.
We offer:
- conception design
- pharmaceutical processing design
- project management
- project undertaken in core part
- water process system and piping system
- turn-key project
- basic system
- water system: R.O. , multi distiller,
- column exchanger, valve, pump,
- connector, pipe, etc
- power supply: CNG generator, ex-proof
- plug, socket, switch, etc
- air source: boiler, steam generator
- central air-conditioner
- dehumidifier
- HVAC
- Ozone generator
- Clean room: Wallboard, roof board, door, window, pass window, change cabinet, flow floor, interlock, special telephone,primary, medium, high, hepa, ulpa filter, air shower, air outlet, particle counter, ultrasonic lamp, washer,drainer, lifter, lamina floor, FFU, etc, design and installation is available.
Products>Engineering Service>Process Pipe
|
||||||||||||||||||||||||||||||||||||
|
Products>Packing Material
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Products>RABS/Isolator
DownLoad |
"A decontaminated unit, supplied with Class 100 (ISO5) or higher air qulity, that provides uompromised, continuous isolation of its interior from the external environment.(e.g.Surrounding cleaning air and personnel")
Fabtech separative device (isolator) utilities physical means, aerodynamic means,or both , to create improved levels of separation between the inside and outside of a defined volume. Physical separation means include both rigid and flexible barriers. Aerodynamic means include air/gas flow with or without filtration.
Some typical applications of isolation technology:
Fabtech range of separator device (isolator) can be used in Pharmaceutical, chemical and biological application to suit customer’s specific requirement are user friendly and efficient function barrier system using combination of positive pressure or negative pressure.
Products>Isolator
Products>Isolator
Products>Isolator
Products>Isolator
Products>Isolator
Products>Isolator
Products>Isolator
Products>Isolator
Products>Isolator
Products>Isolator
Products>Isolator
Products>Isolator
Products>Isolator
Products>Isolator
Products>Solid>Dryer>
DownLoadSpray Dryer
Summar:
It is a new type of granulation machine combining technique of spray drying and fluid bed granulation.It utilizes negative pressure hot air flow to dry the liquid in spray chamber and the liquid on materials very fast,and also agglutinate them together into granules.The size of granules can be controlled by adjusting parameter.Features:
- Combines spray,drying,mixing and granulation into one.
- Makes granules with few assistant materials , small dosage amount ,low sugar or sugar free.
- Granules dissolved instantly ,drinking preparation easily dissolve out and tablets disintegrated easily.
- Machine works at negative pressure with smooth and cleaning inside surface without dead corner.It is convenient for cleaning to meet GMP requirements.
Application:
- Granules for drinking preparation , tablets and capsules.
- Granules for time control releasing.
- Granules for instant dissolved food and beverages.
- Granules for chemicals.
Products>Solid>Dryer>
Main Usage:
The mixer is mainly used in pharmacy, chemical engineering, foodstuff and some other industries for mixing of the following materials or objects:
- Materials which can not withstand the high temperature;
- Materials which are easily subject to oxidation;
- Materials of which the crystals cannot be damaged;
- Materials which require reclamation of residual volatile matter;
- Materials which have intensive stimuli and toxicity;
- Drying of bacteria-free raw materials.
Technical parameters:
Name |
100 |
350 |
500 |
750 |
1000 |
1500 |
2000 |
3000 |
Total volume(L) |
100 |
350 |
500 |
750 |
1000 |
1500 |
2000 |
3000 |
Operating volume(L) |
50 |
175 |
250 |
375 |
500 |
750 |
1000 |
1500 |
Heating area(m2) |
1.16 |
2 |
2.63 |
3.5 |
4.61 |
5.55 |
7.5 |
12 |
Rotational speed(rpm) |
10 |
8 |
8 |
6 |
6 |
5 |
4 |
3-4 |
Power(KW) |
0.8 |
1.1 |
1.5 |
2.2 |
3 |
3 |
4 |
5.5 |
Gyro frame height(mm) |
1600 |
2060 |
2060 |
2160 |
2260 |
2760 |
3160 |
3500 |
Designed pressure inside drum(MPa) |
-0.08 |
-0.08 |
-0.08 |
-0.08 |
-0.08 |
-0.08 |
-0.08 |
-0.08 |
Designed pressure in included layer(MPa) |
≤0.3 |
≤0.3 |
≤0.3 |
≤0.3 |
≤0.3 |
≤0.3 |
≤0.3 |
≤0.3 |
Products>Solid>Dryer>
Vacuum Drying Machine
Principles:
By vacuum drying is meant the placement of the materials or objects to be dried under the vacuum conditions for heating and drying. A vacuum pump is used for pumping out air and moisture so as to speed up the rate of drying.
Note: With the use of condenser, the solvent in the materials or objects can be reclaimed through the condenser. With the use of SK series water-circulating vacuum pump or ZSW series hydraulic jetting vacuum pump set, it is possible not to use the condenser for the saving of energy investment.
Application:
The equipment is suitable for use in the low-temperature drying of the materials or objects which are subject to decomposition and polymerization under the high temperature and the ones of the thermo-sensitive type, leading to the wide application in pharmacy, chemical engineering, foodstuff, electronic devices and some other industries.
Features:
- The boiling point of the materials or objects will be lowered under the vacuum conditions; thus, the heat-transmitting motive force of evaporators will be increased. As a result, it is possible to save the heat-transmitting area of evaporators with relation to the fixed volume of heat to be transmitted.
- As for the thermal source for the evaporating operation, it is possible to use the low-pressure steam vapor or hot water for heating purposes.
- There is less heat loss for the evaporators.
- It is possible to carry out the sterilizing treatment before the drying operation; and in the process of drying, there is no entrance of any impure materials so as to conform with the GMP requirement.
- The equipment belongs to the static-state dryer; so the shapes of the materials or objects under drying will not be damaged.
Technical parameters:
Name Specifications |
YZG-600 φ×L |
YZG-1000 φ×L |
YZG-1400 φ×L |
FZG-15L×W×H |
Dimensions inside the oven(mm) |
600×976 |
1000×1527 |
1400×2054 |
1500×1220×1400 |
Dimensions outside the oven(mm) |
1153×1310×1020 |
1693×1890×1500 |
1920×2386×1920 |
1700×1500×2060 |
Number of heating layers |
4 |
6 |
8 |
8 |
Distance between layers(mm) |
81 |
102 |
102 |
122 |
Baking tray Dimensions (mm) |
310×600×45 |
410×250×45 |
460×640×45 |
460×640×45 |
Number of baking pallets |
4 |
24 |
32 |
32 |
Allowable pressure within the baking-frame tube(MPa) |
<0.784(8kg/cm2) |
<0.784 |
<0.784 |
<0.784 |
Temperature inside the oven(℃) |
<120 |
<120 |
<120 |
<120 |
Load-free vacuity inside the oven(Torr) |
≤30 |
≤30 |
≤30 |
≤30 |
Gasifying rate of water with the vacuity of 30 Torrs and heating temperature of 110℃(Kg/m.h) |
7.2 |
7.2 |
7.2 |
7.2 |
Vacuum pump model and power with use of condenser(KW) |
2X-8 2kw |
2X-8 2kw |
2X-15 7.5kw |
2X-15 7.5kw |
Vacuum pump model and power without use of condenser(KW) |
SK-0.8 |
SK-1.5 |
SK-3 |
SK-3 |
Weight of drying oven(Kg) |
250 |
800 |
2000 |
3200 |
Products>Solid>Dryer>
High Efficient Fluid-bed Dryer
General of applications
The machine is suitable for drying damp granule or powder material in many fields such as pharmaceutical industry, chemical industry, feedstuff industry, fooedstuff industry, etc.
Features :
- This fluid-bed is round structure. So it avoid died corner.
- In the bed there is stirrer. It avoid agglomeration of damp material and forming channel flow during drying.
- The bag filter at top is made from anti-static special fiber. The operation is safe.
- Discharged by turning over. It is quick, and fully.
- Operated at sealed negative pressure and designed by GMP
- The machine can also be designed to feeding and discharge automatically in accordance with requirements.
- Quick drying speed, uniform temperature. In general, the drying time each batch is about 20 ~ 30 minutes.
Technical data :
Item |
Specification |
|||||||||
Feeding capacity |
㎏ /batch |
60 |
100 |
120 |
150 |
200 |
300 |
500 |
≥800 |
|
Power of fan |
kw |
11 |
15 |
18.5 |
22 |
22 |
30 |
37 |
By URS |
|
Power of stirring |
kw |
0.55 |
1.1 |
1.1 |
1.1 |
1.1 |
1.1 |
1.5 |
||
speed of stirring |
rpm |
11 |
||||||||
consumption of steam |
kg/h |
141 |
170 |
170 |
240 |
282 |
366 |
451 |
||
working time |
min |
15-30 |
||||||||
Installation size for reference |
H1 |
mm |
2676 |
2842 |
2862 |
2940 |
3014 |
3300 |
3650 |
|
H2 |
mm |
2366 |
2532 |
2552 |
2630 |
2704 |
2800 |
3150 |
||
A |
mm |
2440 |
2540 |
2540 |
2740 |
2840 |
2940 |
3140 |
Products>Solid>Dryer>
Fluid-bed Dryer
General of applications
The machine is suitable for drying powder or granule. In general, its speed is 10 ~ 20 times of oven.
Features of equipment
The mixing and drying of the equipment can be finished in same equipment. The transfer of mass and heat is quick. Because of operation at negative pressure, there is no flying dust. The equipment has no dead corner. It can clean is fully and without cross pollution. Its heating may use steam, or electric heater. It adopts antistatic filtering material. The lift of filtering bag adopts pneumatic operaton. So the operation is safe. It meets the requirements of GMP.
Technical data:
Specification |
30 |
60 |
90 |
120 |
150 |
200 |
300 |
500 |
800-1000 |
( L ) Volume of container |
100 |
220 |
300 |
420 |
500 |
670 |
1000 |
1500 |
By URS |
( kg/ batch ) capacity |
30 |
60 |
90 |
120 |
150 |
200 |
300 |
500 |
|
pressure Mpa |
|
|
|
0.4-0.6 |
|
|
|
|
|
( kg/h ) Consumption of steam |
70 |
140 |
169 |
211 |
241 |
282 |
366 |
465 |
|
pressure Mpa |
|
|
|
0.6 |
|
|
|
|
|
( m 3 /min ) Consumption of compressive air |
0.3 |
0.6 |
0.6 |
0.6 |
0.6 |
0.9 |
0.9 |
1.1 |
|
( KW ) Power of fan |
5.5 |
11 |
15 |
18.5 |
22 |
22 |
30 |
45 |
|
( °C ) Temperature |
normal temperature ~ 120 °C automatism adjust |
||||||||
Yield of material |
>99 |
||||||||
( % ) Content of final moisture |
0.2 can dry to 0.2 |
||||||||
dB Noise |
No more than 75dB Separated of fan |
||||||||
Installation size for reference |
The same as FL model |
Products>Solid>Dryer>
Fluid-bed Granulator(One-step Granulator)
Features of equipment
- Mixing-granulating-drying in one-step.
- Adopting double chamber filtering bags system, remove dust completely.
- Adopting multi-fluid nozzle, it guarantees that the formed granule is uniform and the content of powder is very low.
- Can choose 2 bar explosive-proof design
- Designed, manufactured and laid out by GMP
General of applications:
The machine is mainly used for the operations of mixing, granulating, drying and coating of granule "Top Spraying", etc of powder material in pharmaceutical industry, foodstuff industry, chemical industry, etc. Such as granule of tablet, granule for quick resolving drinking, condiment. The machine is manufactured in accordance with JB20014-2004 《 Fluid-bed Granulator In Medicine 》 .
Technical Data:
Item |
specification |
||||||||
Name |
Unit |
3 |
5 |
15 |
30 |
45 |
60 |
800-1000 |
|
Container Volume |
L |
12 |
22 |
45 |
100 |
155 |
220 |
By client |
|
Capacity |
kg/batch |
3 |
5 |
15 |
30 |
45 |
60 |
||
Steam |
Pressure |
Mpa |
0.4-0.6 |
||||||
Consumption |
kg/h |
10 |
18 |
35 |
60 |
99 |
120 |
||
Power of fan |
kw |
2.2 |
3 |
4 |
5.5 |
7.5 |
11 |
||
Power of electricity heater |
kw |
6 |
9 |
|
|
|
|
||
Noise |
dB |
Not more than 75dB Separated of fan |
|||||||
|
Pressure |
Mpa |
0.6 |
||||||
Consumption |
m 3 /min |
0.3 |
0.3 |
0.6 |
0.6 |
0.6 |
0.9 |
||
|
H 1 (mm) |
2600 |
2600 |
2100 |
2250 |
2250 |
2850 |
||
H 2 (mm) |
|
|
250 |
320 |
420 |
490 |
|||
H 3 (mm) |
|
|
1900 |
2050 |
2050 |
2600 |
|||
B 1 (mm) |
1550 |
1650 |
1010 |
1160 |
1260 |
1460 |
|||
B 2 (mm) |
|
|
1500 |
1800 |
2060 |
2460 |
|||
φ 1 (mm) |
300 |
400 |
550 |
700 |
860 |
1000 |
|||
φ 2 (mm) |
150 |
180 |
180 |
180 |
250 |
280 |
|||
L (mm) |
850 |
1000 |
1100 |
1250 |
1530 |
1530 |
Products>Solid>Dryer>
Fluid-bed Dryer
General of application :
It is suitable for drying powder and granule material such as raw material in pharmaceutical industry, granule material for pressing tablet, infusion of Chinese medicine; in chemical industry, drying and damp removing of citric acid, other powder and granule shape materials. It can also be suitable for food, drinking infusion, etc; in grain process, drying maize embryo, feedstuff and so on. In general the maximum size of material may reach 6 mm. The best is 0.5 ~ 3 mm
Technical data:
Specification |
( Kg/h) vaporize capacity |
( Kw ) |
quantum of |
Steam consume |
(m) Overall dimensions |
||
A |
B |
C |
|||||
XF-10 |
10--15 |
7.5 |
1500 |
50 |
4X3.5X3.2 |
3.5X3.5X3 |
5X3.5X3.5 |
XF-20 |
20--25 |
7.5 |
2000 |
80 |
4.5X4X4.2 |
4X4X3.2 |
6X4X4.5 |
XF-30 |
30--40 |
15 |
3850 |
150 |
5X4X4.8 |
4X4X4.2 |
6X4X5 |
XF-50 |
50--80 |
30 |
7000 |
250 |
5X4.8X5 |
5X4.8X4.5 |
6X4.8X5 |
Products>Solid>Tablet Press Machine>
Automatic High-speed Tablet Press
Economic-type High speed Tablet Press
Performance |
|
Common Features |
Unique features of GZP series |
Adopts PLC control with auto protective function. |
Auto compensation of powder. |
Touch screen operation. Operation menu is easy to understand. |
Monitoring pressure of each punches and displays the pressure on the touch screen. There are two chutes for qualified tablets and defective tablets . Defective tablets can be rejected from one chute. |
Force-feeding unit with a good applicability to powder; |
|
Central auto lubrication system. |
Pre-press wheel and main press wheel are sustained by hydraulic system. The hydraulic system will act as a buffer and protector while the pressure is over high. |
Main and pre-pressing, tablets formed twice. |
Force-feeding system is capable to increase the feeding ability and prevent thick granules separating from fine granules effectively. All the parts are easy to be fixed, disassembled and cleaned.
Technical parameters |
|||
Data/Model |
GZP-26 |
GZP-32 |
GZP-40 |
No. of stations |
26 |
32 |
40 |
Tooling type |
D |
B |
BB |
Output range(Tablets/h) |
34000~171000 |
42000~211000 |
52000~264000 |
Rotation speed range(rpm) |
22~110rpm |
||
Main pressure |
100KN |
||
Pre-pressure |
16KN |
||
Max tablet diameter |
Ø25mm |
Ø16mm |
Ø13mm |
Max length of irregular tablet |
25mm |
19mm |
16mm |
Diameter of die |
Ø38.1mm |
Ø30.18mm |
Ø24mm |
Max. filling depth |
20mm |
20mm |
16mm |
Diameter of punch |
25.35mm |
19mm |
|
Length of punch |
133.6mm |
||
Pitch circle diameter |
370mm |
||
Main motor power |
7.5KW |
||
Weight |
1450Kg |
||
Dimension |
820×1100×1750mm |
Products>Solid>Tablet Press Machine>
Automatic Triple Rotary High Speed Tablet Press Machine
Automatic Triple rotary High Speed Tablet Press Machine is a kind of large-scale tablet press machine which developed by our experience according to User’s requirement in the World. GZPT-1060 series is best used for mass production of single product. Also used for two-layers tablets and three-layers tablets as well as sandwich tablets.
Advantages In Brief
- Feeding powder in three hoppers. Tablets compressed at three sides. Tablets ejected through three sides chute. Rapid speed with large quantity punches.
- Cancel hydraulic system.Compression rollers adopt mechanical support. To avoid secondary pollution ;Due to the upper and lower Compression rollers adopt independent modules,the rollers adjustment separately, punches can not be clasped . The position of lower compression rollers is controlled by motor and fast adjustment.
- Electric control system is entirely separate from main machine. The operation area is separate from production area. This design can extend the service life of electric control system. Also greatly enhance the sanitation and safety factors.
- The parts in contact with powder such as feeding system、turret、and tablets ejection parts use stainless steel or non-toxic polymer materials. Meets GMP standard.
- No handwheel control. The filling system use servo motor control which has fast reaction speed.The main pressure and pre- pressure use synchronous motor Control. The location of main pressure and pre- pressure measured through the encoder . Accurate data and reduce manual errors.
- Can adjust filling volume to control tablet weight.if over-filling or less-filling or the punch force over-limit,the machine will give alarm. At the same time can monitor the force of a single punch as well as monitor the force curve of punch. Pressure histogram can be displayed on touch screen. The over-weight and less-weight tablets can be rejected.
Technical parameters |
||||
Model |
GZPT-122 |
GZPT-113 |
GZPT-95 |
GZPT-76 |
No.of stations |
122 |
113 |
95 |
76 |
Tooling type |
BBS |
BB |
B |
D |
R.P.M |
5.1~51 |
|||
Max output:(tablets/h) |
1119000 |
1037000 |
872000 |
697000 |
Main motor power |
18.5 KW |
|||
Main pressure |
100KN |
|||
Pre-pressure |
100KN |
|||
Max tablet diameter |
11mm |
13mm |
16mm |
25mm |
Max length of irregular tablet |
13mm |
16mm |
19mm |
25mm |
Max filling depth |
16mm |
16mm |
20mm |
20mm |
Max tablet thickness |
8mm |
8mm |
10mm |
10mm |
Pitch circle diameter |
1060mm |
|||
Diameter of punch |
19mm |
19mm |
19mm |
25.35mm |
Dimension |
1720×1720×2182mm |
|||
Weight |
8000Kg |
Performance
- The filling system use servo motor control which has fast reaction speed. Adjustment precision can reach 0.01mm, Filling volume displayed in the touch screen directly. No need to use their experience to repeated measurement.
- Separate control cabinet to operate the machine; separated production area from operating area; ensures the safety for operator and sanitation for production;
- Adopts 10 inches touch screen to fulfill the automatic controlling, without handwheels;
- Adopts B&R PCC control system with quick and accurate response;
- All information about manufacturing can be displayed, stored, extracted and reset;
- Different degree of user’s password can be set.
Tri-wheeled double deck feeding system
- The upper impeller can increase the powder flow and balance powder density.
- The lower 2 impellers are used for feeding and dosing. To ensure the uniformity of feeding.
- Use Servo motor to adjust dosing cam track. Which can control the filling depth. To ensure an accurate dosing.
- Main pressure system、pre-pressure system、filling system、feeding system adopt modular design. Simple structure. These modular parts can be freely adjusted or removed, Noninterference between each,Maintenance easy.
- The main pressure and pre-pressure are the same structure which can be interchanged each other. Both main pressure and pre-pressure are all 100KN which make it easier for forming tablets.
Products>Solid>Tablet Press Machine>
Automatic High-speed double-sided Tablet Press
The advanced and reasonable design is the foundation of extraordinary quality of production, with a combination of years of experiences on producing high-speed tablet press and modern technology, a new design idea of GZPS series double-sided high-speed tablet press fulfilled the standardization, modularization and serialization of production.
GZPS series possess advantages as high accuracy, high speed and high-degree programmed automation and capable to be the ideal equipments for mass production of tablets.
Meets GMP requirements. can press two layers tablets with different colors, annular tablets, round tablets, engraved tablets and irregular tablets. Available for pharmaceutical factory, food and chemical industries.
Performance
- Automatic concentrative lubrication system;
- Special oil proof, dust proof and noise proof system;
- Isolated visual window with high clarity;
- A 360°open structure of pressing chamber, without dead area. Easy to clean, operate and maintenance;
- Special 4 poles construction ensures the machine to perform stably and durably;
- Advanced international heat treatment of the punch turret makes it have supper longevity
Same size of pre-press wheel and main-press wheel. The both wheels can be interchanged, which is propitious to removing air for material and extend the time of pressing;
Steel support for press wheel makes tablets formed best and ensures the consistency of thickness of tablets;
Enough space of replacement for both die and upper & lower cam tracks, it is easier for maintenance.
Adopts the mode of motor along with encoder to adjust the position of main press wheel and pre-press wheel, This ensures the high accuracy.
Separate control cabinet to operate the machine; separated production area from operating area; ensures the safety for operator and sanitation for
production;
Adopts 10 inches touch screen to fulfill the automatic controlling, without handwheels.
Adopts B&R PCC control system with quick and accurate response;
All information about manufacturing can be displayed, stored, extracted and reset;
Different degree of user’s password can be set.
Adopts automatic servo motor controlling; adjust dosing cam tracks; control the depth of filling, ensures high accuracy of tablets’ difference. Tri-wheeled double deck feeding system;
Upper impeller is used for enhancing the fluidness of powder to equalize the density of powder;
Lower 2 impellers are used for filling and dosing to ensure the equality during filling.
Technical parameters |
||||
Data/Model |
GZPS-49 |
GZPS-61 |
GZPS-73 |
GZPS-79 |
No. of stations |
49 |
61 |
73 |
79 |
Tooling type |
D |
B |
BB |
BBS |
Output range(Tablets/h) |
94000~423000 |
117000~526000 |
140000~630000 |
140000~680000 |
Rotation speed range(rpm) |
16~72rpm |
|||
Main pressure |
100KN |
|||
Pre-pressure |
100KN |
|||
Max tablet diameter |
Ø25mm |
Ø16mm |
Ø12mm |
Ø11mm |
Max length of irregular tablet |
25mm |
19mm |
16mm |
13mm |
Diameter of die |
Ø38.1mm |
Ø30.18mm |
Ø24mm |
Ø22mm |
Max. filling depth |
20mm |
20mm |
16mm |
16mm |
Main motor power |
11Kw |
|||
Diameter of punch |
25.35mm |
19mm |
||
Pitch circle diameter |
680mm |
|||
Weight |
4800Kg |
|||
Dimension of machine |
1300 X 1300 X 2000mm |
|||
Dimension of control cabinet |
890 X 510 X 1200mm |
Products>Solid>Tablet Press Machine>
Rotary Tablet Press Machine
Rotary tablet press machine is once-pressed tablet press which is used to produce large diametric tablets and suitable for varieties of small dosage production.
Technical parameter
Dies: 17
Max pressure: 60KN
Dia of tablet: 20mm
Depth of pill: 15mm
Thickness of tablet: 6mm
Turret speed: 36 r/min
Production capacity: 40000 pcs/h
Motor: 4kw
Overall Size: 60x90x140
Weight:8000kg
Products>Solid>Sieving Machine>
Vibrating Screener
Main Uses:
The machines are suitable for flow operation, and they are the perfect equipments for sifting out the unequal granules from different sizes continuously.
Structure & Feature:
The machines consist of the hopper, vibrating chamber, connecting shaft and electric motor. Vibrating chamber is equipped with eccentric wheel, rubber soft tubes, main shaft and shaft-bearing, etc. When the adjustable eccentric weight dropper is pressed to the central line of main shaft by motor driven, in unbalanced conditions, it creates eccentricity, which makes the materials forming regular track eddy. The amplitude of the weight dropper may be regulated according to different materials and the meshes of screens. The whole machine has the features of compact structure, small volume, non-dust flying, low noise, high output, low energy consumption, easy to be moved and maintained
Technical Parameters:
Type |
ZS-350 |
ZS-515 |
ZS-650 |
Capacity(kg/h) |
60-500 |
60-1300 |
180-2000 |
Screen Mesh(mesh) |
12-200 |
12-200 |
12-200 |
Power(KW) |
0.55 |
0.75 |
1.50 |
Main Speed(r/min) |
1380 |
1370 |
1370 |
Overall Size(mm) |
540× 540 × 1060 |
710 × 710 × 1290 |
880 × 880 × 1350 |
Weight(kg) |
100 |
180 |
250 |
Products>Solid>Sieving Machine>
Vibration Sifting Machine
Main Usage:
vibration sifting machine is modified on the base of Model ZS series delaminated sieve , which is suitable of flow line and is the ideal equipment for sifting out the granules in different size and proportion and for continuous materials-delivering.
Structure & Performance:
This machine is composed of the hopper , vibrating motor and bracket . The vibrating motor is fixed on the vibrating tray is supported on the vibrating rubber bowl ,with strong and stable vibrating force , stepless speed-regulating ,compact structure ,small volume ,non dust-flying ,low noise , high output , low energy consumption , and easy to be moved and maintained.
Technical Data:
Model |
LZS-350 |
LZS-515 |
LZS-650 |
Capacity (kg/h) |
60-500 |
60-1350 |
180-2100 |
Number of mesh (mesh) |
12-200 |
12-200 |
12-200 |
Power (KW) |
0.75 |
1.5 |
2.2 |
Vibrating frequency |
1450 |
1450 |
1450 |
Overall size |
600×500×900 |
850×600×1150 |
1000×750×1300 |
Weight (kg) |
100 |
150 |
200 |
Products>Solid>Coating Machine>
High-efficiency Coating Machine
Usage:
The BGB-C Series high-efficiency coating machine is mainly used in pharmaceutical and food industries. It is a high-efficiency, energy saving, safe and clean equipment for coating tablets, pills and candies with organic film, water soluble film, slow and controlled release film and sugar film etc., which conforms to the requirement of GMP.
Working principle:
The tablet cores make continuous complicated orbital motion within the closed rotating drum under the action of a streamline guide plate. During the motion, coating medium automatically sprays according to the technological process and rational technological parameters, at the same time hot air is supplied under a negative pressure. The hot air penetrates through the tablet core layers and is discharged from the bottom of the layers, so that the coating medium sprayed on the surface of tablet cores will dry rapidly and evenly, thus forming a solid and smooth surface film.
Features:
- The control system consists of PLC and HMI. The design is reasonable and programming is flexible, which are adapt to the different needs of pharmaceutical technology, thus featuring reliable work, stable performance and conforming to the requirement of GMP.
- Under the action of the agitator of streamline guide plate, the tablet cores are tumbling smoothly and exchanging frequently, thus eliminating the phenomenon of tablet cores to falling from a high place and the collide, so that solve the problems of broken pieces and chipped edge, and also improve the rate of finished products. The narrow surface of the guide plate eliminates the adhesion of coating material on its surface, thus saving the coating material and improving the quality of medicine.
- The peristaltic pump with constant pressure and variable eliminates the need for a return pipe. The turning radius of the drum varies along with the pressure. The slurry output and the quantity of slurry sprayed are balanced automatically, thereby stabilizing the effect of atomization, simplifying the spray system, preventing the spray gun from plugging-up, and saving the coating material, moreover, the cleaning is simple without dead corner.
- The spray gun is specially designed for film coating machine with even atomization and large coverage of spraying. The universal adjustable spray head makes the cleaning mechanism of spray gun unaffected by charge quantity, so that film coating can proceed continuously, thus reducing the filmcoating time and saving coating material.
- Control and display the negative pressure in coating pan.
- Control and display supply air speed.
- Control and display the temperature.
- Preventing the spray gun from plugging up.
- The memory and the print function
- The above functions realized display and controlled of technical parameters. It can write SOP operation and guide the operation by quantitative index to guarantee the same quality of each batch, which completely conforms to the requirement of GMP.
Main technical parameters:
Model |
BGB-350C |
BGB-150C |
BGB-75C |
BGB-10C |
Production capacity (kg/run) |
350 |
150 |
75 |
10 |
Speed adjusting range of coating drum (rpm) |
2-11 |
2-15 |
4-19 |
6-30 |
Motor power of main machine(kW) |
4.0 |
2.2 |
1.1 |
0.55 |
Regulating range of hot air temperature (℃) |
Normal temperature-80 degree centigrade |
|||
Filtration accuracy of hot air ( mm) |
0.5μm (100000 grade) |
|||
Motor power of hot air machine(kW) |
2.2 |
1.1 |
1.1 |
0.75 |
Motor power of exhaust air machine(kW) |
7.5 |
5.5 |
3 |
2.2 |
Motor power of vibration dust-cleaning device(kW) |
0.37 |
0.37 |
0.37 |
0.37 |
Motor power of peristaltic pump(kW) |
0.18 |
0.18 |
0.18 |
0.18 |
Overall dimension of main machine |
2000×1560×2300 |
1570×1260×2000 |
1350×1010×1630 |
1100×750×1540 |
Weight of main machine(kg) |
1650 |
900 |
550 |
380 |
Products>Solid>Coating Machine>
High-efficiency Poreless Coating Machine
Usage:
The BGW-C Series high-efficiency poreless coating machine is a high-efficiency, energy-saving, safe, clean, computer controlled and mechatronics equipment which is used for coating sugar, organic film, water soluble film, slow and controlled release film on traditional Chinese and Western tablets and pills (including micro-pills, small pills, water-bindered pills, drip pills and granulated pills) and it also conforms to the requirement of GMP. It is a high-tech product first successfully developed in China by this factory.
Working principle:
The tablet cores (micro-pills, small pills or plain tablets) make continuous and complicated orbital motion within a closed rotating drum under the action of a streamline guide plate. Controlled by computer and according to the optimum technological parameters, they are automatically sprayed with coating medium while hot air under a negative pressure is led in from one side of an air distributing pipe in the center of the drum, then clean hot air penetrates through the tablet core layers and is discharged after being collected to the other side of the air distributing pipe by a pore duckbill-shaped (or oval) air paddle embedded in the tablet core layers, so that the coating medium sprayed on the surface of tablet cores will dry rapidly and evenly, thereby forming a layer of solid, compact, neat and smooth surface film.
Features:
- It has all the features of BGB-C Series high-efficiency coating machine.
- The coating drum is with a poreless structure. AboveØ0.6mm tablet coating, versatile in use.
- It has a specially structured air distributing system, and the air intake and exhaust pipes can be interchanged according to the needs.
- Different materials are equipped with different air paddles. The paddles can be embedded into or taken off from the material according to technology needs.
- It has a special cleaning and drainage unit.
Main technical parameters:
Model |
BGW-350C |
BGW-150C |
BGW-75C |
BGW-10C |
Production capacity (kg/run) |
350 |
150 |
75 |
10 |
Speed adjusting range of coating drum (rpm) |
2-11 |
3-15 |
4-19 |
6-30 |
Motor power of main machine (kW) |
4.0 |
2.2 |
1.5 |
0.55 |
Regulating range of hot air temperature |
Normal temperature to 80 degree centigrade |
|||
Filtration accuracy of hot air (mm) |
0.5 μm (100000 grade) |
|||
Motor power of hot air machine (kW) |
2.2 |
1.1 |
1.1 |
0.75 |
Motor power of exhaust air machine (kW) |
7.5 |
5.5 |
3 |
2.2 |
Motor power of vibration dust-cleaning device (kW) |
0.37 |
0.37 |
0.37 |
0.37 |
Motor power of peristalsis pump (kW) |
0.18 |
0.18 |
0.18 |
0.18 |
Products>Solid>Granulator>
Wet Mixing Granulator
This machine is included in Series Wet Mixing Granulator, which can do the processes of mixing and granulating in one time. This machine is accordance with GMP standard, and has good granulating quality and no cross infection. The maximum produce capacity is 8kg per batch. GMP-SM-018-A/B are suitable for lab, and the trial-produce for new products or small-batch produce in medicine factories. GMP-SM-018-A/B are equipped security interlock, which can make the machine more safe and credible; and use horizontal structure which has good rigidity, simple structure and easy to maintain. The main parts are assembled inside the machine. The cover sheet is made of stainless steel with polishing. The parts which touch medicine powder directly is all made of stainless steel. The whole granulating process is airtight. GMP-SM-018 type is controlled in double speeds, and GMP-SM-018-A is controlled by frequency conversion to regulate speed.
Type | GMP-SM-018-A |
GMP-SM-018-B |
|
wet granulat/batch | kg |
8比重大于0.6g/cm3 |
|
Granulaton time/batch | min |
干混约2分钟 制粒约1~4分钟 |
|
Mixing speed | rpm |
380、570 |
950~600 |
Mixing motor power | kw |
3/4 |
4 |
Chopping speed | mpa |
1500/300 |
450/2700 |
Pressure of compressed air | m3/min |
1.3/1.8 |
0.75 |
Chopping motor power | rpm |
>0.6 |
|
Amount of compressed air | kw |
0.5 |
|
Overall size | mm |
1230×650×1125 |
Products>Solid>Granulator>
Intelligent Automatic High-Effective Mixing and Granulating Machine
Initiate Domestically:
- HMI screen cue, Siemens PLC control.
- Solid and round grain, with uniform grain size and high product yield offer you with the best recovery.
- Mixing and granulation are finished in one step, the efficiency Is increased by 4 to 5 times.
- Automatic discharge.
- Smaller floor space requirement,and short cleaning time.
- Save 15-25% dosages of adhesive and shorten drying time.
- Totally closed production complied with GMP.
- It can still obtain good effect when specific weight difference between main medicine, subsidiary medicine auxiliary materials are greater.
- Jacket-kettle can be used to heat or cool the materials.
- Spraying feature is designed to solve the problem of extract powder granulation.
- Low noise < 72 db 12.Space between kettle bottom and blade is small (0.3~1mm) to avoid deposit in kettle bottom completely.
Proper equipment achieves ideal granulating effect:
- Manual filling material (standard).
- With gravity and closed filling system (standard) or vacuum filling system (optional).
- Coniform material trough system ( standard), vacuum and inert gases (optional).
- Rotation speed of z-shape impeller (standard), can be stepless-adjusted.
- Shape of cutter can be changed and rotation speed adjustable.
- Top cover can be lifted, with inspect window (HLSG-200-400 is standard assembly).
- Top cover is opened manually, with inspect window (HLSG-50 is standard assembly).
- Filtering bag (standard).
- CIP- metal filtering bag which will be cleaned by high pressure (optional).
- Various charging mouth and adhesive-spraying system (optional).
- CIP cleaning system (optional) for material trough, discharging exit, impeller and air tight dements of cutter, filter bag..
Control system:
With PLC Full-computer Automatic Control produced by German Siemens Co.,this system has friendly man-machine interface, screen cue operation and graphicparameters. Data can be input by simple touch keyboard. Technological parameters can be automatically memorized, so you only need to touch the Menu Key for the next production.
Main Technical Variables:
Item |
Unit |
GMP-SM-017-A |
GMP-SM-017-B |
GMP-SM-017-C |
Total Volume |
L |
120 |
270 |
600 |
Operating Volume |
L |
20-80 |
50-180 |
100-450 |
Feeding Quantity |
kg |
10-50 |
40-100 |
80-200 |
Impeller speed |
r.p.m |
15-350 |
6-230 |
5-160 |
Motor Power |
kw |
11 |
15 |
22 |
Rotating Speed of cutter |
r.p.m |
300-2850 |
300-2850 |
150-1440 |
Motor Power |
kw |
3.0 |
5.5 |
7.5 |
Control Cabinet |
kg |
120 |
150 |
200 |
Weight of Machine |
kg |
700 |
2500 |
3500 |
Overall Dimensions |
mm |
1750×780×1750 |
2115×1615×2350 |
2700×1565×2235 |
Products>Solid>Granulator>
Type Intellectualized Fully Automatic High-Efficiency Mixing Granulator/SUPERMIXER
Initiate Domestically:
- HMI screen cue, Siemens PLC control.
- Solid and round grain, with uniform grain size and high product yield offer you with the best recovery.
- Mixing and granulation are finished in one step, the efficiency Is increased by 4 to 5 times.
- Automatic discharge.
- Smaller floor space requirement,and short cleaning time.
- Save 15-25% dosages of adhesive and shorten drying time.
- Totally closed production complied with GMP.
- It can still obtain good effect when specific weight difference between main medicine, subsidiary medicine auxiliary materials are greater.
- Jacket-kettle can be used to heat or cool the materials.
- Spraying feature is designed to solve the problem of extract powder granulation.
- Low noise < 72 db 12.Space between kettle bottom and blade is small (0.3~1mm) to avoid deposit in kettle bottom completely.
Control system:
With PLC Full-computer Automatic Control produced by German Siemens Co.,this system has friendly man-machine interface, screen cue operation and graphicparameters. Data can be input by simple touch keyboard. Technological parameters can be automatically memorized, so you only need to touch the Menu Key for the next production.
Main Technical Variables:
Item |
Unit |
GMP-SM-033-A/B |
GMP-SM-033-C |
Total Volume |
L |
15/30 |
70 |
Operating Volume |
L |
2-10/5-20 |
10-45 |
Feeding Quantity |
kg |
1-5/3-10 |
6-25 |
Impeller speed |
r.p.m |
50-720 |
25-550 |
Motor Power |
kw |
2.2 |
5.5 |
Rotating Speed of cutter |
r.p.m |
300-2850 |
300-2850 |
Motor Power |
kw |
0.75 |
2.2 |
Control Cabinet |
kg |
- |
- |
Weight of Machine |
kg |
165/200 |
500 |
Overall Dimensions |
mm |
1050×500×1300 |
1700×730×1650 |
Products>Solid>Granulator>
Roll Compactor
Western medicine powder and extracting material from Chinese traditional medicine(spray dry and freeze dry) both have the features of different powder size, uneven density, not good mobility and easy to form layer. So granulating, one key process to deal with these features, must be done to succeed to do the next process. Such asTablet pressing, capsule filling and granule packing.
Working principlepour the dry mixed medicine powder with certain crystal water into the taper hopper, make pre-pressure by the rotating feeding of special unequally spaced taper screw to press the material, eliminate air and disperse the material evenly in the surface of two press wheel, then press it to thin tablet by two press wheel with press thrust, and cut it then granulate in granulating cylinder.
Main technical parameters of the whole machine:
capacity: ≤100kg/h
Material transferring power: 2.2kw
Compacting power: 5.5kw
Granulation power: 1.5kw
Pump power: 0.55kw
Lifting power: 0.25kw
Dimension: 1750 x 1000 x 2200 mm
Machine weight: 1900kg
Roller gap: can be adjusted according to different material
Roller dia x width: dia 210x80
Screw speed: 10-60rpm
Roller speed 5-20rpm
Granulation speed: 88/105rpm
Pump pressure: 6.3MPa
Master cylinder push power: 2x11T
Products>Solid>Pulverizer>
Grinding and Granulating Machine
General description
grinding and granulating machine is used in pharmaceutical, food, fine chemical processing industries. This machine reaches the world advanced level and conforms to the GMP specification. It is completely made of stainless steel material. Working principle
The material to be processed enters into the feed inlet of grinding and granulating machine, then drops into the conical sieve chamber. The rotary knife plays a whirling action to the material, and throws the granules to the sieve mesh surface by centrifugal force, meanwhile, the granulates are ground into particles by the shearing action produced by the rotary knife and the sieve mesh, and discharged through the sieve apertures. The size of ground particles can be adjusted by the sieve mesh number, the gap between rotary knife and sieve mesh, and the rotary speed.
Pharmacy:
- Grinding of raw material
- Granulating of wet material
- Granulating of dry material
- Unqualified tablets to be recycled can be granulated according to the requirement of granularity
Food: Grinding of biscuit for recycling
Others: Grinding and granulating of rough raw material
Grinding and granulating of lump raw material.
Features:
- Thoroughly solving the tough problem of material contaminated by the debris of worn sieve mesh in a pendulum-type granulating machine.
- The unique patented shaft sealing technology ensures no leakage of lubrication oil.
- Easy to control granularity
- No retention dead corner, no material overheating.
- Less dust, no vibration, low noise.
- High efficiency, energy saving, large production capacity.
- Attractive appearance ,easy to clean
- A-type machine apply to the work requirements of 100-grade workshop
Main technical parameters:
Model |
FZB-150(A) |
FZB-300(A) |
FZB-450(A) |
FZB-700(A) |
FZB-1000(A) |
Capacity (kg/h) |
15-150 |
30-300 |
45-450 |
70-700 |
100-1000 |
Granularity(mesh/in) |
6~80 |
||||
Drive seat temperature rise |
<30 degree centigrade |
||||
Range of speed regulation(rpm) |
FZB series frequency control 300-3600 |
||||
Motor power(kW) |
1.5 |
1.5 |
2.2 |
3 |
5.5 |
Overall dimension (L×W×H) (mm) |
720×445 |
810×445 |
920×445 |
1000×500 |
1100×600 |
Height from ground to discharge mouth (mm) |
650 |
650 |
690 |
690 |
700 |
Products>Solid>Pulverizer>
Model GMP-SM-022 Series High Efficient Mill
This machine is developed with the method of mixed powder jetting ,which is widely applied for the materials grinding for the trades of pharmaceutics,chemical,and foodstuff etc.
Specialty:
This machine has a simple structure and is easy to be installed and dismantled and cleaned ,with the features of stable running ,convenient moving, low noise ,and high grinding efficiency etc.
Working Method:
This machine is a high speed running one.The target material is smashed by the cutting and grinding of high speed knifes,which the figure and size of knifes can be selected in accordance with different material and the size of granules can be acquired by screen changing or speed-regulating.
Technical Data:
Model |
GMP-SM-022-A |
GMP-SM-022-B |
GMP-SM-022-C |
GMP-SM-022-D |
Capacity |
10-100 |
50-300 |
60-400 |
100-500 |
Fineness of finished products |
12-120 |
12-120 |
12-120 |
12-120 |
Power |
3 |
7.5 |
7.5 |
11 |
Speed change |
2350-4360 |
1000-2400-4400 |
1000-2400-4400 |
1000-2400-4400 |
Overall size |
1050×600×1600 |
1100×860×1520 |
1000×1300×1600 |
1280×950×1600 |
Weight |
150 |
250 |
320 |
320 |
Products>Solid>Pulverizer>
Model GMP-SM-023 Series Air-Cooled Crusher
Main Usage:
This machine is widely applied for the materials crushing by the industries of pharmaceutics, chemical,and foodstuff etc.
Specialty:
The crushing chember is equipped by the wind wheel type high speed rotary cutters so that the airflow in the chamber is large enough to eliminate any heat in the chamber ,It possesses the merits of smooth operating ,easy dismantling and assembling ,low noise ,and good crushing result.
Working Method:
It uses the wind wheel type high speed rotary cutters and the fixed cutters to crush ,mill and shear raw material ,which accompanied by strong airflow inside of the chamber to bring out the heat with the finished products through the screen . The size of granules can be achieved by changing of the screen.
Technica Data:
Model |
GMP-SM-023-A |
GMP-SM-023-B |
GMP-SM-023-C |
Capacity |
20-80 |
30-200 |
50-300 |
Size of input granules |
< 3 |
< 4 |
< 4 |
Size of output granules |
12-120 |
12-120 |
12-120 |
Power |
2.2 |
5.5 |
7.5 |
Speed of principal axis |
3000 |
2900 |
2900 |
Overall size |
550×420×1088 |
770×750×1500 |
870×750×1708 |
Weight |
185 |
195 |
200 |
Products>Solid>Pulverizer>
Model GMP-SM-024 Mini-Efficient Pulveriger
Main Usage:
This machine is consisted of main motor , auxiliary motor , and electrical control cabinet with the capabilities of winnowing , non-sieve or mesh , equality of granule size , and continuous processing etc . It meets the international advanced level and is suitable for the material grinding by the trade of pharmaceutics, chemical ,and foodstuff etc.
Working Method:
Raw material is delivered to the grinding chamber via hopper by spiral feeder , and is cut and sheared by the high speed cutters ,then the material is moved into the whirlwind separator and the sack dust catcher by the negative pressure sucking method , The ejection materical meets the product requirement.
Technical Data:
Model |
GMP-SM-024 |
Caoacity (kg/h) |
2-50 |
Size of input granules (mm) |
< 5 |
Size of output granules (kw) |
80-320 |
Total Power (kg) |
7.3 |
Main speed (r/min) |
-8000 |
Overall size (L×W×H) |
2000×800×2000 |
Weight |
500 |
Products>Solid>Pulverizer>
Model GMP-SM-025-A/B Mini-Efficient Pulveriger
Main Usage:
This machine is consisted of main motor , auxiliary motor , and electrical control cabinet with the capabilities of winnowing , non-sieve or mesh , equality of granule size , and continuous processing etc . It meets the international advanced level and is suitable for the material grinding by the trade of pharmaceutics, chemical ,and foodstuff etc.
Working Method:
Raw material is delivered to the grinding chamber via hopper by spiral feeder , and is cut and sheared by the high speed cutters ,then the material is moved into the whirlwind separator and the sack dust catcher by the negative pressure sucking method , The ejection materical meets the product requirement.
Technical Data:
Model |
GMP-SM-025-A |
GMP-SM-025-B |
Caoacity (kg/h) |
30-800 |
50-1200 |
Size of input granules (mm) |
15 |
< 15 |
Size of output granules (kw) |
80-320 |
80-300 |
Total Power (kg) |
46 |
84.15 |
Main speed (r/min) |
-3800 |
-2800 |
Overall size (L×W×H) |
6640×1300×3960 |
7500×2300×4530 |
Weight |
1500 |
3200 |
Products>Solid>Blender>
Multi-directional Motions Mixer
Usage:
multi-directional motions mixer is a novelty material mixer, which is extensively used in Pharmacy, Chemical industry, Metallurgical Industry, Food, Light industry, Agriculture and so on. The machine can mix powder or granules very evenly, so that the mixed materials can reach their best effect.
Working principle:
The mixing barrel is supported by the driving and driven shafts which are crossed in space and also vertical to each other, and are respectively connected by Y-type universal joints, so that the mixing barrel makes unique translation, turning, turning over motions in Three-dimensional space, thereby speeds up the flow and diffusion of the materials being mixed, while avoids the specific gravity segregation of materials due to the action of centrifugal force in an ordinary mixer, and ensures the materials to reach an ideal mixing within a short time.
Features:
- It has a unique driven shaft servo mechanism, so that the whole machine runs stably and reliably with low noise.
- The equipment does not need a foundation and features convenient erection and maintenance as well as long service life.
- It can ensure a good mixing effect and short mixing time is short. The evenness of mixing reaches above 99.5%.
- Its charge coefficient reaches 85%, more than double that of an ordinary rotary mixer.
- Thanks to its low height and small rotating space, it usually does not need skip floor.
- The eccentric cone design of the discharge end of the mixing barrel ensures discharge free of dead corner and residue, so it is easy to clean and conforms to the requirement of GMP.
- HD (A) series multi-directional motions mixer can start in low speed, run smoothly in rated speed, timing and deceleration for stop. Automatic shutdown location of the machine is the best location for charging and discharging.
Main technical Parameters:
Model |
HD-5 |
HD-20 |
HD-50 |
HD-100 |
HD-200 |
HD-400 |
HD-600 |
Volume of mixing barrel (L) |
5 |
20 |
50 |
100 |
200 |
400 |
600 |
Max. charge volume(L) |
4 |
17 |
40 |
85 |
170 |
340 |
500 |
Max. charge weight ( kg) |
4 |
15 |
40 |
80 |
100 |
200 |
300 |
Main shaft speed (rpm) |
≥20 |
≥20 |
≥17 |
≥14 |
≥14 |
≥12 |
≥12 |
Motor power(kW) |
0.75 |
0.75 |
1.1 |
2.2 |
3 |
4 |
5.5 |
Weight of whole machine (kg) |
90 |
100 |
200 |
650 |
900 |
1350 |
1550 |
Overall dimension |
900×700 |
970×780 |
1200×1100 |
1360×1500 |
1800×1600 |
2200×1900 |
2400×2100 |
Products>Solid>Blender>
Double Cone_shaped Mixer
Main Uses:
This is a new high-efficient and high-precision mixing equipment. It’s widely used in mixing the materials in pharmaceutical, chemical and feedstuff, etc.
Features:
Its rotation and revolution are controlled by a set of motors and a swaying wheel decelerating device. The machine stirs on a large scale and mixes quickly. It’s better to be applied in mixing materials that are not even grades with great disparity in its specific gravity.
Technical Parameters:
Model |
Capacity |
Volume |
Loading Coefficient |
Density |
Power |
Mixing time |
Overall Size(mm) |
Weight |
SHJ200 |
95 |
0.2 |
0.6 |
0.8 |
2.2 |
6-10 |
¢890× 1850 |
600 |
SHJ500 |
190 |
0.5 |
0.6 |
0.8 |
2.2 |
6-10 |
¢1160× 2250 |
800 |
SHJ1000 |
380 |
1 |
0.6 |
0.8 |
4 |
8-10 |
¢1450× 2700 |
1200 |
SHJ2000 |
720 |
2 |
0.6 |
0.8 |
5.5 |
8-10 |
¢1850× 3450 |
1800 |
SHJ4000 |
1400 |
4 |
0.6 |
0.8 |
11 |
8-10 |
¢2260× 4210 |
3000 |
Products>Solid>Blender>
Hopper Type Mixer
Usage:
The HL hopper type mixer is extensively used for mixing dry powder with dry powder or dry powder with grain in the process of diversified solid preparation production in the pharmaceutical industry. This machine can be equipped with hoppers of various specifications from 600L to 1400L for mixing work. It is suitable for mixing pharmaceuticals of multiple varieties and different batches according to the technological requirement in large and medium-sized pharmaceutical enterprises, so it can achieve multiple purposes in one machine.
Working principle:
After tightly clamping the charged hopper, the rotating arm begins to rotate at a speed below 50% of the critical speed according to the preset technological parameters. As the symmetrical axes of hopper and the rotating center line of rotating arm form an included angle, materials with different constituents are strenuously rolling over in the closed hopper and producing high shear to achieve the best effect of mixing.
Features:
- It is a high-tech product which integrates machinery, electronics and hydraulics into one body. It employs hydraulic clamping, mechanical driving and computer control, and is easy to operate and convenient to adjust technological parameters.
- The control system is highly sensitive, and the whole machine is compact in structure, stable and reliable in running.
- A single machine can be equipped with hoppers of various specifications such as 400L, 600L, 800L, 1000L, 1200L, 1400L. The materials remains in the hopper after mixing, which will be dismounted from the rotating arm and shifted directly to the next procedure, thus greatly improving the utilization efficiency of the mixer and avoiding cross contamination of materials.
- The mixing barrel can be used as a batching barrel in the upstream procedure and as a charging hopper in the downstream procedure (compressing and filling of tablets). The evenness of mixing reaches above 99%, the volume charge coefficient reaches 0.80. Both inner and outer surfaces of the barrel are clean and smooth without dead corner.
- After mixing each batch of pharmaceuticals, the empty hopper is sent to a special cleaning room for cleaning, so as to keep the workshop clean, which fully conforms to the requirement of GMP.
Main technical parameters:
Model |
HL-600 |
HL-1000 |
Maximum working load (kg) |
600 |
1000 |
Maximum hopper capacity (L) |
400, 600 |
600, 800, 1000, 1200 , 1400 |
Maximum volume density of material(g/cm3) |
≤0.8 |
≤0.8 |
Total power(kW) |
11 |
15 |
Rotating arm speed (rpm) |
12-18 |
12-15 |
Operating pressure of hydraulic system (Mpa) |
7 |
7 |
Operating pressure of pneumatic system (Mpa) |
≥0.6 |
≥0.6 |
Maximum rotating diameter (mm) |
Φ2200 |
Φ2910 |
Range of working zone (mm) |
Φ2400 |
Φ32000 |
Height of body frame (mm) |
2150 |
2700 |
Products>Solid>Capsule Filling Machine >
Semi-automatic Capsule Filling Machine
This machine with electricity and steam to combination control,equiipped with electronic automatic counter device is suitable for filling various domesticor imported capsule,It can automatically finish the action of location,separation,filling,locking etc for capsule,Reduce labor strength,improve productiong efficiency,accord with the requirement of medicine sanitary,It is an ideal equipment with smartness accuracy for dosage,novel structure,good-looking,ease of operation,for filling capsule medicine in pharmaceutical indusrty.
Technical Parameters:
Maximum productive capacity |
12500pcs/h |
Capsule size |
00#0#1#2#3#4# hard capsule |
Power (kw) |
2.2 |
Power supply |
380V 50Hz |
Ovrerall dimensions (mm) |
1350x700x1600(LxWxH) |
weight (kg) |
400 |
Products>Liquid>Filling Machine>
plastic bottle compact line for washing, filling and sealing
Main application:
This compact line consists of three systems: cleaning, filling and sealing, can fulfill processing procedures such as bottle input, bottle conveying, turning over the bottles by manipulator, ion-air flushing, dosing filling and Nitrogen charging, cap orienting, cap feeding, heating, emptying, heat sealing, output and etc. It can be connected with other machines to form a whole packing compact line. It is mainly used for 50-500ml plastic bottles production in pharmaceutical factories.
Main technical parameter:
- Suitable size: 50~500ml round or other shape of plastic infusion bottle
- Output:3600~12000 pieces/hour
- Consumption of Nitrogen:0.05-0.1Mpa 40L/min
- Consumption of cooling water:30L/h
- Consumption of compressed air:0.4-0.6Mpa 1000L/min
- Washing heads:30 pieces
- Filling heads:30 pieces
- Sealing head: 30 pieces
- Power:33kw,including heating power:18kw
- Net weight:7000kg
- Overall dimensions:4850×2400×2090mm
Bottle feeding station
- It adopts patent technology of combining of bottle feeding rail and friction wheel, to realize transfer of continuous bottle inputting and starwheel. Bottles are conveyed through neck clipping method, has no scratching, size parts are easy and quick for replacing.
- It adopts auto bottle feeding technology, reduces labor intensity, has high automation degree, compact structure, small area and low running cost.
Washing station
- It adopts ion-wind to clean, which saves running costs. While washing, ion wind gun inserts into bottle about 2/3 depth to discharge, to get best washing effect. Power of ion wind gun has power trouble monitoring and no-discharge monitoring, to guarantee real-time washing effect in production. It will control main motor to stop when meets power trouble or no discharging trouble.
- It has vacuumizing and waste air collecting emission function, which can neutralize charge in bottle effectively, and eliminate polluted air and fixtures in time. It can guarantee washing effect, avoid second pollution.
- It can increase water washing function as customer’s request.
Filling station
- It adopts new type pipe clamping filling technology, has high measuring precision. Filling precision will not be influenced by running speed of machine. It can realize no-bottle-no-filling.
- Whole filling process is in closed state, and pipe connection part adopts quick-changing joint. It can realize CIP/SIP conveniently.
Cap orienting and sucking station
- It adopts auto confirming center of three steel balls and vacuum sucking patent technology, which can reduces friction between caps and plate effectively.
- It adopts electromagnetism resonating principle to orient caps, Cap conveying part has function of alarm and stop when meets block or absence and function of no-bottle-no-capping.
Sealing station
- It adopts continuous heating and quick sealing method, has good sealing quality and smooth sealing. Heating pieces are divided into up and down layers, can control temperature respectively, to meet requirement of different melting point between cap and bottle.
- There is emptier before sealing after heat melting, which can eliminate redundant air in bottles, guarantee quality of finished products and effect of terminal sterilization.
Output station
- Bottles are sent to conveying belt through output starwheel. Manipulator open, bottles are carried by conveying rail. Whole process is finished.
Products>Liquid>Filling Machine>
Oral liquid Compact Line For Cleaning, Sterilizing, Drying, Filling And Sealing
Main application:
This line is composed of QCL60(40) vertical washing machine, SZK620/42 far infrared sterilizing & drying tunnel, YGZ15/25(12/25-B) or YGZ15/16(12/25-C) filling & capping machine. It is divided into three working zones: washing, drying & sterilizingm filling and sealing. Each machine can function independently, or be connected as a compact line. It could finish processing procedures such as: water sprinkling, ultrasonic washing, clamping and overturning bottles by manipulator, water flushing(interior and exterior), air flushing(interior and exterior), preheating, drying & sterilizing, cooling, filling, caps orienting, capping and etc. It is mainly used for production of oral liquid bottles and other small dose bottles in pharmaceutical factories.
Character:
It adopts ultrasonic washing and washing by alternant jetting water and airflow. It is the most popular and with highest clarity washing equipment in the world. In whole washing process, three washing mediums adopt independent needles, each group of needle only flush one washing medium, avoids cross contamination, which meets GMP requirement much more.
It adopts heat radiation sterilizing technics by far infrared quartz tube, has good pyrogen eliminating effect.
It adopts big starwheel to input bottles and locate, filling needles move to-and-fro for tracking filling. It adopts single knife follow capping principle or three knives capping principle. It has few bottles transferring times, high capping qualified rate and good adaptability.
It adopts advanced PLC control man-machine interface operation which can not only control the whole line but also control single machine. It guarantees normal running of the whole compact line, with high automation degree, few operator and low labor intensity.
Main technical parameter:
Type |
Suitable sizes |
Output |
Power |
Net weight |
Overall dimensions |
BXKF5/25-B1(B2) |
5-30ml oral liquid |
6000-18000 pcs/h |
64.5kw,normal working consumption:38kw |
6500kg |
8930×2410×1850mm |
BXKF5/25-A1(A2) |
5-30ml oral liquid |
6000-12000 pcs/h |
64.5kw,normal working consumption:38kw |
6000kg |
8530×2410×1850mm |
Products>Liquid>Filling Machine>
Eyedrop Filling Machine
This machine is suit for filling and stoppering all kinds of eyedrop bottles.the highest speed of it is 80pcs/min and the configuration is very straitness,The machine is controlis very easy.Both filling and stoppering are going on stop by stop.Each working procedure goes stably and has no vial fall.and all kinds of vials and plastic bottles can use it too.
Technical Parameter:
Type:GMP-LM-008
Specification:5-20ml
Total Power:1.8kw
Filling Precision:≤3%
Power supply:AC380V/50HZ
Production capability:80瓶
Compressed air:0.7Mpa
Weight:600kg
Outline dimension(L×W×H):1500×1400×1100(mm)
Products>Liquid>Centrifugal Machine>
Large Capacity Refrigerated Centrifuge
Large Capacity Refrigerated Centrifuge applies various most state-of-the-art technologies. Its performance is approaching international standards. The instrument is equipped with imported machines in its refrigeration system, a frequency conversion electromotor in its drive system and an imported transducer. The whole instrument is controlled by a microcomputer and has a large LCD screen on it which can recognize Chinese characters.
DL6R is widely used in fields of biology, medicine, pharmacy, genetics, food sanitation, epidemic prevention, environmental science
main specifcations:
Rotor |
Max. |
R.C.F. |
Max.Rotor |
Speed |
Timer Range |
Noise |
Power Supply |
Dimension |
水平转子 |
4200r/min |
5010 |
1000ml×6 |
±20r/min |
1~99min |
<68 |
AC220V |
750×880 |
J6 |
6000r/min |
6410 |
500ml×6 |
±20r/min |
1~99min |
<70 |
Products>Liquid>Centrifugal Machine>
High-Speed Refrigerated Centrifuge
High-Speed Refrigerated Centrifuge applies various most state-of-the-art technologies. Its performance is approaching international standards. The instrument is equipped with imported machines in its refrigeration system, a frequency conversion electromotor in its drive system and an imported transducer. The whole instrument is controlled by a microcomputer and has a large LCD screen on it which can recognize Chinese characters. With the application of an auto identifying system, it can effectively prevent the rotors from overspeeding.
GL21R is widely used in fields of biology, medicine, pharmacy, genetics, food sanitation, epidemic prevention, environmental science, colleges and etc.
Main Specifications:
Rotor | Max. Speed |
R.C.F. (xg) |
Max.Rotor Capacity |
Temp Accuracy |
Speed Accuracy |
Timer Range | Noise (db) |
Power Supply |
6×500ml |
10000r/min |
17800 |
500ml×6 |
±1℃ |
±20r/min |
1~999min |
<70 |
AC220V |
6×250ml |
15000r/min |
34780 |
250ml×6 |
±1℃ |
±20r/min |
1~999min |
<70 |
|
8×50ml |
18000r/min |
43820 |
50ml×8 |
±1℃ |
±20r/min |
1~999min |
<70 |
|
18×10ml |
21000r/min |
50400 |
10ml×18 |
±1℃ |
±20r/min |
1~999min |
<70 |
Products>Packing Machine>Labelling Machine>
Automatic Cold Glue Labling Machine
The automatic round bottle-labeling machine is designed for rational production aimed with automatic operation of pasting, labeling, easy operation and effective production as well. Since the labeling position is able to be unified, it adds greatly to the beauty and tidy of the product appearance.
Feature:
- The design of complete mechanism operation together with enclosed oil-bath transmission ensures smooth、quiet running and trouble free.
- Low load of motor. Conveyer belt and panel made of stainless steel are durable,cleanly and easy for maintenance.
- Suitable for both individual operation and connected with production line.
- Can be moved with casters at will to adjust the room of operation space.
Specification:
Modesl | GMP-PM-001-A | GMP-PM-001-B | GMP-PM-001-C | GMP-PM-001-D | GMP-PM-001-E |
Bottle Dia | 16-40mm | 16-40mm | 30-80mm | 50-120mm | 25-60mm |
Label Size | H×M 20-80×50-100 |
H×M 20-80×50-100 |
H×M 40-110×50-130 |
H×M 40-110×50-360 |
标签长 180mm以内 |
Speed | 40-100/分 min | 60-150/分 min | 40-100/分 min | 30-60/分 min | 120-200/分 min |
Motor Power | 1/2Hp&1/4Hp | 1/2Hp&1/2Hp | 1/2Hp&1/4Hp | 1/2Hp&1/4Hp | 1/2Hp&1/4Hp |
Power Source | 380VAC 50/60Hz | 380VAC 50/60Hz | 380VAC 50/60Hz | 380VAC 50/60Hz | 380VAC 50/60Hz |
Type of Paste | 树脂胶 | 树脂胶 | 树脂胶 | 树脂胶 | 树脂胶 |
Machine Weight | N/G 550kgs/750kgs |
N/G 700kgs/900kgs |
N/G 550kgs/750kgs |
N/G 550kgs/750kgs |
N/G 550kgs/750kgs |
Packing Size | L×W×H 2.2m×1.2m×1.4m |
L×W×H 3.5m×1.2m×1.4m |
L×W×H 2.2m×1.2m×1.4m |
L×W×H 2.2m×1.2m×1.4m |
L×W×H 2.2m×1.2m×1.4m |
Products>Packing Machine>Labelling Machine>
Vertical Sticky Labeling Machine
Model:GMP-PM-002
General technical index of sticky labeling machine
Roll-type outer diameter:30mm(length of trademark strip is below 240M)
Trademark to be used:special roll-type sticky trademark strip
Roll inner diamenter:76mm Trademark spacing:>2mm
Feature:
- High-performance servo motor from Japan Mitsubishi is used with accurate positioning for labeling.
- PLC system from Japan Mitsubishi and touch screen is used to enable simpler operation.
- It is provided with the productivity display function in this machine so that the production speed can be mastered at any time.
- The thermal code printer is used to print out the manufacturing date,batch number,and valid date.The printing work can be finished at same time.
- Either independent work or integrated production line can be designed as required.
- This machine table is made from SUS304 stainless steel material.It can resist the rust.It is durable,clean and easily maintained.
Specification:
Models |
GMP-PM-002-A(立式) | GMP-PM-002-B(卧式) | GMP-PM-002-C(扁瓶) |
Speed |
80~220 pcs/min | 40~300 pcs/min | 40~80 pcs/min |
Bottles Specification |
D:20~100mm |
D:12~22mm H:40~100mm |
P:20~80mm H:80~200mm |
Total Power |
0.75KW | 0.7KW | 0.9KW |
Power Source |
220VAC 50/60Hz | 220VAC 50/60Hz | 220VAC 50/60Hz |
Machhine Dimension |
2m(L)×0.85(W)×1.3m(H) | 1.6m(L)×0.8m(W)×1.38m(H) | 2m(L)×1.45m(W)×1.25m(H) |
Machine Weight |
300KG | 200KG | 400KG |
Products>Packing Machine>Labelling Machine>
Vertical Sticky Labeling Machine For Small Round Bottle
Model:GMP-PM-003
General technical index of sticky labeling machine
Roll-type outer diameter:30mm(length of trademark strip is below 240M)
Trademark to be used:special roll-type sticky trademark strip
Roll inner diamenter:76mm Trademark spacing:>2mm
Feature:
- High-performance servomotor from Japan Mitsubishi is used with accurate positioning for labeling.
- PLC system and touch screen from Japan Mitsubishi is used to simplier operation.
- It is provided with the productivity display function in this machine so that the production speed can be mastered ant any time.
- The thermal code printer is used to print out the manufacturing date,batch number,and valid date.The printing work can be finished at same time.
- Either independent work or integrated production line can be designed as required.
- This machine table is made from SUS304 stainless steel material.It can resist the rust.It is durable、clean and easily maintained.
Specification:
Models | GMP-PM-003 |
Speed | 80~220瓶/分 |
Bottle Specification | D:10~35mmH:30~60mm |
Total Power | 650W |
Power Source | AC 220V 50Hz |
Machine Dimension | 1350×750×1200mm |
Machine Weight | 200kg |
Products>Packing Machine>Labelling Machine>
Vertical Labeler For Round Bottle
GMP-PM-004 is economical, self contained, easy to operate, equipped with auto teach programming touch screen. Built in microchip storing different job setting makes fast and easy changeover. This automatic labeling system is ideal for cylindrical container with diameter from 30mm – 100mm. (above size could be customized made)
Labeling speed up to 200 CPM
Touch Screen Control System with Job Memory
Simple Straight Forward Operator Controls
Full-set protecting device keep operation steady and reliable
On-Screen trouble shooting & Help Menu
Stainless Frame
Open Frame design, easy to adjust and change the label
Variable Speed with stepless motor
Label Count Down (for precise run of set number of labels) to Auto Shut Off
Stamping Coding Device attached
Cosmetic /personal care
Household chemical
Food & beverage
Nutraceuticals
Pharmaceuticals
Technical Parameter:
- Labeling speed:80-200 bts/min
- Bottle external diameter:Ø30-100mm
- Motor total power: 300W
Products>Packing Machine>Labelling Machine>
Labeler with tray inserter
WTT-C is economical, self contained, easy to operate, equipped with auto teach programming touch screen. Built in microchip storing different job setting makes fast and easy changeover. This automatic labeling system is combined with bottle to tray inserter, it is ideal for slim cylindrical container with diameter from 10mm – 25mm such as ampoule.
Labeling speed up to 160 CPM
Put vial or ampoule into tray automatically
From 5 to 10 pieces/tray optionally (Vial or ampoule)
Touch Screen Control System with Job Memory
Simple Straight Forward Operator Controls
Full-set protecting device keep operation steady and reliable
On-Screen trouble shooting & Help Menu
Open Frame design, easy to adjust and change the label
Variable Speed with stepless motor
Stamping Coding Device (Optional)
Cosmetic /personal care
Household chemical
Food & beverage
Nutraceuticals
Pharmaceuticals
Technical Parameters:
- Label-tray insert speed: 80-220 bts/min (according to the label and bottle size)
- Suitable bottle size: dia 10-30mm
- tray specification: 4-10 bts/tray
- Equipment Size:2200×600×1500mm
- Weight:350kg
- Power supply: 1KW, 220V, 1Ph, 50-60Hz
Products>Packing Machine>Cartoning Machine>
GMP-PM-006 Multifunctional Automatic Cartoner
Capability and Characteristic:
- Continuous mechanical feeding materials and carton packaging, and working of each functional part is in harmony, stable and reliable.
- When materials do not reach correct position, the pusher has an alarm and halt facility for that, in order to ensure good quality of carton packaging and safety in operation effectively.
- Constantly moving carton-opening mechanism and pulling carton-opening mechanism are more stable and reliable.
- Vibrating material categorizing and feeding mechanism is stable and reliable.
- Halt facility for air pressure and vacuum protection, when caster opened, the halt facility will be checked automatically for operating safety of the machine.
- It is easy, convenient and quick to change and adjust product size by hand wheel on instrument panel.
- Variable frequency speed regulation, PLC automatic control, Operating on touch screen, words and numeric display, easy to operate, stable coefficients in operation.
- Overload protection for principal driving, indication of failure diagnosis, and automatic halt of failure.
Main Function:
Automatic folding (1~4 folding) and conveying of manual leaflet, automatic material categorizing and feeding; automatic paper carton spreading, automatic manual leaflet and material carton packaging, synchronous (3-row) batch number printing, automatic paper carton sealing, automatic waster eliminating.
Applicable Object:
Al-plastics blister medicine cards, injection tray, bottles, ointments, rectangular or pill articles.
Packaging material:
Paper carton size:(L×W×H)
(55~220)×(20~120)×(12~70)mm
Material: 250~350 g/m2
Manual leaflet sizel:
(L×W)before folding:(100~250)×(100~150)mm
(L×W)after folding:(100~150)×(20~40)mm
Material: 50~70 g/m2
Usaging Requirements:
Clean compressed air: Pressure 0.6 Mpa;
Air consumption (Air compressor)≥0.2 m3/min
Power consumption: 380V 50 Hz 6 Kw
Vacuum source: degree of vacuum-0.09 Mpa
Overall Dimensions:(L×W×H) 4100×1500×1750(mm)
Weight:3500 KgKg
Main Technical Parameters:
Item |
Parameters |
Output |
80~220cartons/min |
Finished product rate |
≥99% |
Eliminating rate of waster |
100% |
Working noise |
≤80dB(A) |
Products>Packing Machine>Cartoning Machine >
GMP-PM-007 Multifunctional Automatic Cartoner
Capability and Characteristic:
- Adopts full servo system, synchronous belt driving without any lubricating oil.
- Servo motor works in feeding materials and carton packaging. Speed and travel are adjustable, stable and reliable in operation.
- Single motor driving, PLC automatic control, Operating on touch screen, words and numeric display, automatic counting and automatic speed regulation, easy to operate, stable in operation.
- Photoelectric detection and monitoring system to realize overload protection,words indication of failure diagnosis, and automatic halt of failure.
- In a specified range, realizes carton packaging of various specifications without replacing parts. And it is easy and convenient to adjust.
- The especial designed feeding mechanism can realize sole machine produce.
- Innovative and transparent security casters to enhance general view and security of the machine.
Main Function:
Automatic folding ( 1~4 folding ) and conveying of manual leaflet, automatic material categorizing and feeding; automatic paper carton spreading, automatic manual leaflet and material carton packaging, synchronous (3-row) batch number printing, automatic paper carton sealing, automatic waster eliminating.
Applicable Object:
Al-plastics blister medicine cards, injection tray, bottles, ointments, rectangular or pill articles.
Packaging material:
Paper carton size:(L×W×H)
(70~130)×(45~100)×(15~50)mm
Material: 250~350 g/m2
Manual leaflet size:
(L×W)before folding:(100~250)×(100~150)mm
(L×W)after folding:(100~150)×(20~40)mm
Material: 50~70 g/m2
Usaging Requirements:
Clean compressed air: Pressure 0.5~0.8 Mpa;
Air consumption (Air compressor)≥0.2 m3/ min
Power consumption: 380V 50 Hz 6Kw
Vacuum source: degree of vacuum-0.09 Mpa
Overall Dimensions:(L×W×H) 4700×1100×1950(mm)
Weight:3500Kg
Main Technical Parameters:
tem |
Parameters |
Output |
60~140 cartons/min (related with materials of carton packaging) |
Finished product rate |
≥99% |
Eliminating rate of waster |
100% |
Working noise |
≤80dB(A) |
Products>Packing Machine>Cartoning Machine >
GMP-PM-008 Multifunctional Automatic Cartoner
Capability and Characteristic:
- Main machine adopts mechanical drive of cam and crank connecting link, and working of each functional part is in harmony, stable and reliable.
- Single motor driving, Variable frequency speed regulation, PLC automatic control, Operating on touch screen, words and numeric display, automatic counting, easy to operate, stable in operation.
- Photoelectric detection and monitoring system to realize overload protection, words indication of failure diagnosis, and automatic halt of failure.
- Switching of manual and automatic operation of machine.
- In a specified range, realizes carton packaging of various specifications without replacing parts.
Main Function:
Automatic folding (1~4 folding) and conveying of manual leaflet, automatic material categorizing and feeding; automatic paper carton spreading, automatic manual leaflet and material carton packaging, synchronous (3-row) batch number printing, automatic paper carton sealing, automatic waster eliminating.
Main Configuration: Products of national and international famous brands are preferred.
Applicable Object:
Al-plastics blister medicine cards, injection tray, bottles, ointments, rectangular or pill articles.
Packaging material:
Paper carton size(L×W×H):(70~125)×(40~78)×(15~30)mm
Material: 250~350 g/m2
Manual leaflet size:
(L×W)before folding:(100~250)×(100~150)mm
(L×W)after folding:(100~150)×(20~40)mm
Material: 50~70 g/m2
Usaging Requirements:
Clean compressed air: Pressure 0.5~0.8 Mpa;
Air consumption(Air compressor)≥0.2 m3/ min
Power consumption: 380V 50 Hz 1 Kw (related with packaging article)
Vacuum source: degree of vacuum-0.09 Mpa
Overall Dimensions(L×W×H): 1700×1060×1600(mm)(standard)
Weight:800 KgKg
Main Technical Parameters:
Item |
Parameters |
Output |
40~80 cartons/min (related with materials of carton packaging ) |
Finished product rate |
≥99% |
Eliminating rate of waster |
100% |
Working noise |
≤80dB(A) |
Products>Packing Machine>Cartoning Machine >
Automatic horizontal cartooning machine
Introduction
Automatic vertical constant cartoning machinery (GMP-PM-009-A/B/C) is developed by our company based on the local standard by referring the advanced machine abroad. It is mechatronic product with high technology which can operate constantly. The machine adopts the advanced transmission technique abroad. Every move is controlled by encoder, PLC, pneumatic product, and mechanism. The speed is adjusted by inverter, so speed is high and stable. The machine has many advantages, such as advance structure, easy operation, failure display, and easy maintenance. The machine consist leaflet folding machine and carton packing machine. It is also equipped with blister feeding system and batch auto printing device. The max speed is 180 bottles per min. It is suit for bottle, hose, blister, cosmetic, toothpaste, etc. The packing efficiency is high.
Technical parameters:
GMP-PM-009 automatic cartoning machine |
GMP-PM-009 automatic vertical cartoning machine |
||||||
Model |
GMP-PM |
GMP-PM |
GMP-PM |
GMP-PM |
GMP-PM |
||
Nominal speed |
>180 cartons/min |
260 cartons/min |
350 cartons |
>80 cartons/min |
180 cartons/min |
||
Normal production speed |
≥150 cartons/min |
≥220 cartons/min |
≥300 cartons/min |
≥60 cartons/min |
≥150 cartons/min |
||
Boxing open heads |
3 |
5 |
5 |
1 |
4 |
||
power |
380v 50Hz |
380v 50Hz |
|||||
power |
3Kw |
4Kw |
3 Kw |
||||
vacuum |
60m3/H 0.12bar |
60m3/H 0.12bar |
|||||
Compressed air |
consumption |
40NL/min |
30NL/min |
||||
pressure |
0.6MP |
0.6MP |
|||||
weight |
3000Kg |
3500 Kg |
2200Kg |
Find the specific requirement of cartoner and leaflet below.
The packing limit list in this sheet. If the specs is beyond the limit, the nozzle should be changed.
Features:
Imported chain, stretched in reasonable range, four chains, location stably, less failure.
Good surface treatment, anti-rust.
The gear is under special treatment, durable
The leaflet cannot be sucked when there is no blister.
Control the leaflet and cartoner by checking the blister, to avoid empty packaging.
Auto coder printing device
Steel code, the code position at the carton cap lid, the size and number according to the user requirement.
Sealing system:
Mechanical seal and hot melt sealing
Auto ejection system
To avoid the halt caused by no leaflet or no bottle.
Main drive overload protection device
Auto stop if overload for protection
Manual turning system, button switch
Emergency stop switch
Man-made emergency stop when unexpected failure happens
Auto check when the door opens
To ensure the operator safty.
Products>Packing Machine>Cartoning Machine >
Automatic vertical cartooning machine
Introduction
Automatic vertical constant cartoning machinery (KHV180/KHV260/KHV350 GMP-PM-010-A/B/C) is developed by our company based on the local standard by referring the advanced machine abroad. It is mechatronic product with high technology which can operate constantly. The machine adopts the advanced transmission technique abroad. Every move is controlled by encoder, PLC, pneumatic product, and mechanism. The speed is adjusted by inverter, so speed is high and stable. The machine has many advantages, such as advance structure, easy operation, failure display, and easy maintenance. The machine consist leaflet folding machine and carton packing machine. It is also equipped with blister feeding system and batch auto printing device. The max speed is 180 bottles per min. It is suit for bottle, hose, blister, cosmetic, toothpaste, etc. The packing efficiency is high.
Technical parameters:
GMP-PM-010 automatic cartoning machine |
GMP-PM-010 automatic vertical cartoning machine |
|||||||
Model |
GMP-PM |
GMP-PM |
GMP-PM |
GMP-PM |
GMP-PM |
|||
Nominal speed |
180 cartons/min |
260 cartons/min |
350 cartons/min |
80 cartons/min |
180 cartons/min |
|||
Normal production speed |
≥150 cartons/min |
≥220 cartons/min |
≥300 cartons/min |
≥60 cartons/min |
≥150 cartons/min |
|||
Boxing open heads |
3 |
5 |
5 |
1 |
4 |
|||
power |
380v 50Hz |
380v 50Hz |
||||||
power |
3Kw |
4Kw |
3 Kw |
|||||
vacuum |
60m3/H 0.12bar |
60m3/H 0.12bar |
||||||
Compressed air |
consumption |
40NL/min |
30NL/min |
|||||
pressure |
0.6MP |
0.6MP |
||||||
weight |
3000Kg |
3500 Kg |
2200Kg |
Features:
Imported chain, stretched in reasonable range, four chains, location stably, less failure.
Good surface treatment, anti-rust.
The gear is under special treatment, durable
The leaflet cannot be sucked when there is no blister.
Control the leaflet and cartoner by checking the blister, to avoid empty packaging.
Auto coder printing device
Steel code, the code position at the carton cap lid, the size and number according to the user requirement.
Sealing system:
Mechanical seal and hot melt sealing
Auto ejection system
To avoid the halt caused by no leaflet or no bottle.
Main drive overload protection device
Auto stop if overload for protection
Manual turning system, button switch
Emergency stop switch
Man-made emergency stop when unexpected failure happens
Auto check when the door opens
To ensure the operator safty.
Imported components used.
To meet the GMP requirements, we choose Germany bearing wear, no oil, reduce pollution. To ensure the stability of the whole system, pneumatic products using internal famous brands, such as SKF, NSF. Imported synchronous belt and conveyer is used to ensure the high speed. The main motor is made in TAIWAN Main electrical equipment
Products>Packing Machine>Bunding Machine>
GMP-PM-013 Strapping Machine
Products:
Automatic strapping machine have been as the requisite packaging machinery in most industry. It makes your products package more perfect. This machine cludes automatic stopping device. The motor will stop automatically (Machine suspend at this moment).Machine will carry over running when use again.We company also have vertical strapping machine for aquatic product table type mini baling machine and fully automatic baling machine and so on.
Technology Parameter:
Pack speed: 1.8s/strap
Pack size random
Largest force of packing: 35KG
Width of Polypropylene belt: 6-15mm
Power Supply: 220v/50Hz
Power: 250W
Weight: 100KG
Machine Size: 895×580×730mm
Products>Packing Machine>Bunding Machine>
SK-3 Strapping Machine
Products:
Automatic baling machine have been as the requisite packaging machinery in most industry. It makes your products package more perfect. This machine includes automatic stopping device. The motor will stop automatically (Machine suspend at this moment).Machine will carry over running when use again.We company also have vertical baling machine for aquatic product table type mini baling machine and fully automatic baling machine and so on.
Technical Parameter:
Packing Speed: 1.8s/strap
Packaging size: Any size
Max baling strength: 35KGS
Belt width: 6 to 15mm
Voltage:220V/50Hz
Power: 250W
Machine weight: 80KGS
Products>Packing Machine>Bunding Machine>GMP-PM-014 Carton Sealer
GMP-PM-014 Carton Sealer
Products:
It can move up and down manually. The error of carton height is under 10mm.The machine adopts imported high grasping rubber belt with reliable running and automatic lid folding frame. Complete sealing action at one time.
Parameters:
- Dimension: 1650mm*740mm*1480mm~1560mm
- Work table height: 705-785mm
- Adjustable sealing speed: 20m/min (standard); 18m/min
- Carton size: min(L*W*H):180mm*164mm*125mm; max(W*H):500mm*600mm
- Material of rubber belt: OPP, PVC
- Rubber belt width: 36, 48, 60 9(mm)
- Power source: 220V/50Hz
- Power: 2*90W
- Weight: 136kg
Products>Packing Machine>Bunding Machine>
Strapping Machine
Description:
Automatic strapping machine have been as the requisite packaging machinery in most industry. It makes your products package more perfect. This machine includes automatic stopping device. The motor will stop automatically (Machine suspend at this moment).Machine will carry over running when use again. We company also have vertical strapping machine for aquatic product table type mini baling machine and fully automatic baling machine and so on.
Technology Parameter:
- Pack speed: 1.8s/strap
- Pack size random
- Largest force of packing: 35KG
- Width of Polypropylene belt: 6-15mm
- Power Supply: 220v/50Hz
- Power: 250W
- Weight: 100KG
- Machine Size: 895×580×730mm
Products>Packing Machine>Bunding Machine>
Carton Sealer
Introduction:
It can move up and down manually. The error of carton height is under 10mm.The machine adopts imported high grasping rubber belt with reliable running and automatic lid folding frame. Complete sealing action at one time.
Parameters:
- Dimension: 1650×740×1480mm~1560mm
- Work table height: 705-785mm
- Adjustable sealing speed: 20m/min (standard); 18m/min
- Carton size: min(L×W×H):180×164×125(mm); max(W×H):500×600(mm)
- Material of rubber belt: OPP, PVC
- Rubber belt width: 36, 48, 60 9(mm)
- Power source: 220V/50Hz
- Power: 2×90W
- Weight: 136kg
Products>Packing Machine>Sealing Machine>
GMP-PM-015 Induction Aluminum Foil Sealing Machine
Products:
According to the principle that metallic object via the action of electric-magnetic induction can generate great vortex, melt the adhesive film under the aluminum foil and then agglutinate them with the bottles. Charicters: This machine adopts portable induction head to seal. It increase over current, over heat to protect circuit. Contact board make soperation easy, simple, steady, and longevity.
Technical Parameter:
- Voltage 220V+/-5% 50HZ
- Power 0.5kw
- Current <4A
- Work Temperature 25-45 Degree Centigrade
- Air Humidity 90%
- Sealing Diameter 20-100mm
- Sealing Material Professional Induction Aluminum Foil
- Machine Size 340×290×130
- Weight 4.5KG
Products>Packing Machine>Sealing Machine>
GMP-PM-016 Induction Aluminum Foil Sealing Machine
Products:
It is a new type of packing machine, which adopts electromagnetic induction heating system. It is available for plastic or glass bottles with diameters 8-60mm, which inner covers are made of aluminum foil or aluminum-cardboard compound. The machine is widely used in pesticides, pharmaceuticals, chemicals, lubricants, cosmetics, mineral water, condiments, flavors and wash
Technical Parameters:
- Voltage 220V/50HZ 1KW
- Anode Current 0.18A
- Grid Current 50MA
- Filament Pressure 10V
- Production Ability 1-10bottle/min
- Size 500 * 610 * 950MM
- Weigh 65KG
Working principle :
This machine can bring UHF thought step up transformer reached the high pressure and oscillator bring surge. When there is coil pass the seal of the plastic and glass bottles which has the Alu-foil or Alu-foil paperboard gasket.’s inner cover. The seal coil has bring the effect of backset to the Alu-foil. It can produce heat when the molecule has mutual friction.. then the alu-foil was sealed in the mouth of the bottle. The produce has the merit of moistureproof, anti-counterfeiting, guard against theft, anti-leak, easy to pack and transport etc.
Products>Packing Machine>Sealing Machine>
GMP-PM-017 Solid Ink Coding Continuous Band Sealer
Products:
This machine is suitable for sealing of all kinds of material what could be sealed and adopts electronic constant temperature and no frequency speed adjusting mechanism.
The machine adopt solid-ink coding device can print the desired designs simultaneously with sealing, the characters clear and conspicuous. The color are selectable and uneasy to decay and unchangeable, instant printing and instant dry, with strong adhesive. It can print R type two lines of No. 4 characters(PT18) of three lines of No. 5 character(PT18)of three lines of No. 5 Characters(PT 10.5). If necessary, count device can be fixed to it as well. GMP-PM-017 series has several models for choosing.
Technical Parameters:
Voltage AC 220V/50HZ
Motor Power 130W
Heat Sealing Power 220W×2
Sealing Width: 8mm,10mm
Temperature Range Common Temperature to 300 degree C
Printing Type Solid Ink Roller
Sealing Height 10 to 40mm
Film Thickness <=0. 08mm
Weight 45kg
Sealing Speed 0-12m/min
Conveyor Size 930×150(mm)
Conveyor Loading for Single Bag Max. <=1kg
Overall Conveyor Loading <=3kg
Machine Size (L*W*H) 950×400×430(mm)
Products>Packing Machine>Sealing Machine>
GMP-PM-018 Plastic Film Continuous Sealing Machine
Products:
It is wildly used to seal and bag food, medicine, daily chemical, native food, electronic component, vegetable seed etc. It is the best facility for factory, shop and service industry to largely produce.
Characteristics: It adopts electronic constant temperature control and automatic conveying equipment to seal various plastic film bags. It can be used with all kinds of packing production lines. The sealing mouth is unlimited. It seals continuously with high efficient and sealing quality.It has two types. One is horizontal type which suits for packing and sealing dry products. Another is vertical type which suits for packing and sealing powder and liquid products. The machine can equip with printing set which can print name of factory, trademark, date, period of validity, Frederick number, lot number etc. Complete the seal and print at one time. According to the requirement, it changes the date and lot number. It measures up to the Drugs Act and Food Sanitation Law. It also can equip with counting device which makes the production easy to arrange.
Technology Parameter:
- Power Supply 220V/50HZ 500W
- Sealing Speed 0-12 M/min
- Sealing Width 6-15mm
- Sealing Height 150-270mm
- Temperature Range 0-300 degree C
- Number of Lettering <=39
- Loading Weight 1KG*3
- Machine Size 800*420*320MM
- Weight 30KG
Products>Packing Machine>Folding Machine>
GMP-PM-019 Automatic Folding Machine
Products:
GMP-PM-019 series automatic folding machine is a minitype desk folding machine developed by we company. This series is suitable for kinds of folding. This machine with suitable structure adopts big adhesive wheel to send paper. Separating accuracy is steady, operation is convenience, efficiency is high. It is widely used in numbers of paper folding of products instruction, archives letter, and business letter. GMP-PM-019 type minus width after folding is 30mm. This machine is specialized in paper folding of instruction for medicine and cosmetics which request small width after folding.
Technical Parameter:
- Voltage AC220V/50HZ 110V/60HZ
- Power 50W
- Folding Tray 2
- Machine Size(mm) 1050×525×505
- Box Outside Size(mm) 620×520×620
- G.W. 44KGS
- N.W 35KGS
- Producing Speed Max 80mm/min
- Paper Size Max 310mm×700mm
- Paper Size Min 50mm×70mm
- Paper Thickness 20g--125g(It better to reduce producing speed when paper weight is less than 40g)
Products>Packing Machine>Folding Machine>
GMP-PM-020 Automatic Folding Machine
Products:
GMP-PM-020 Automatic folding machine adopts advanced design and polished manufacture. It is widely used in kinds of paper folding with different size and thickness in designing scope. It could be folded as, single folding, report form folding, inner folding, outer folding, kwan-yin folding, and cross folding.Adjustment is easy, paper sending is fluent, no frequency speed adjustment, and legerity and high efficient. It is suitable for high speed printing centre, manufacturer, and department group.
Technical Parameter:
- Voltage AC220V/50HZ 110V/60HZ
- Power 50W
- Folding Tray 4
- Machine Size(mm) 1080×530×580
- Box Outside Size(mm) 640×570×850
- G.W. 62KGS
- N.W 48KGS
- Paper Size Max 310mm×700mm
- Paper Size Min 50mm×70mm
- Paper Thickness 20g--125g(It better to reduce producing speed when paper weight is less than 40g)
- Producing Speed Max 80mm/min
Products>Packing Machine>Folding Machine>
Automatic Paper Folding Machine
Feature:
Quickly adjust the standard & non- standard folding type.
Paper length in standard and non-standard can be adjusted.
Advanced needle bearing can increase machinery life.
Various paper thicknesses can be adjusted quickly.
Attach paper-delivery pressure regulator, deliver paper smoothly.
New wide-size paper delivery roll, deliver paper correctly.
Attach paper folding speed regulator.
Attach automatic arrangement paper receiver, deceive paper neatly.
Attach cross folding press-printer, install easily.
Specification:
Machine size: 1055 (L) x 585 (W) x 400 (H) mm
Machine weight: 48kg
Paper size: 70-690 mm (L), 50-365mm(W)
Paper weight: 13-110LB
Paper folding speed: 9600pcs/h (80LB, A4 size, single folding)
Power supply: 110V AC 60Hz, 240V AC 50Hz
Min. paper folding size: 38mm
Products>Packing Machine>Folding Machine>
Automatic Paper Folding Machine
Feature:
Quickly adjust the standard & non- standard folding type.
Paper length in standard and non-standard can be adjusted.
Advanced needle bearing can increase machinery life.
Various paper thicknesses can be adjusted quickly.
Attach paper-delivery pressure regulator, deliver paper smoothly.
New wide-size paper delivery roll, deliver paper correctly.
Attach paper folding speed regulator.
Attach vertical paper receiver station, deceive paper neatly.
Attach cross folding press-printer, install easily.
Specification:
机型及规格 |
上抽式送纸 |
||||
DE-8 |
DE-322 |
DE-282 |
DE-28/4 |
||
最大纸尺寸(mm) |
365×690 | 320×450 | 280×350 | 280×400 | |
最小纸尺寸(mm) |
50×70 | ||||
最小折纸尺寸(mm) |
38 | 35 | 22 | ||
折纸盘(PC) |
2 | 4 | |||
最大纸重量(LB) |
Up to 110 LBS,Index | ||||
最小纸重量(LB) |
11 LBS | ||||
净重(Kg) |
48 | 30 | 23 | 55 | |
尺寸(mm) | L | 1055 | 900 | 680 | 1055 |
W | 565 | 550 | 450 | 480 | |
H | 400 | 420 | 420 | 470 |
Products>Packing Machine>Capping Machine>
GMP-PM-023(300-C) capping machine
Main application:
This machine is mainly used for capping of vials in pharmaceutical factories.
Working principle:
This machine adopts soft rolling & pressing capping structure with single knife. It can finish procedures such as bottle orienting, cap orienting, capping and etc.
Main technical parameter:
Type |
Suitable sizes |
Output |
Capping heads |
Power |
Net weight |
Overall dimensions |
GMP-PM-023 |
2-30ml vials |
6000-24000 pcs/h |
18 |
1.0kw |
900kg |
2100×1430×1750mm |
GMP-PM-023-C |
2-50ml vials |
6000-18000 pcs/h |
12 |
1.22kw |
700kg |
1760×1120×1490mm |
Products>Packing Machine>Capping Machine>
GMP-PM-024 Series Star-plate Automatic Capper
General Description:
- GMP-PM-024 Series Star-plate automatic capper includes four models: 1. spiral screw type 2. aluminum cap roll thread crush type 3. aluminum cap crush type 4. plastic cap crush type. User must specify the type they want while putting and order.
- GMP-PM-024 Series star-plate automatic capper is suitable for such fields as pharmaceutical, health care products, cosmetics, food, chemistry., etc, especially good for the capping of the vessels for liquids.
- GMP-PM-024 Series star-plate automatic capper, together with other bottling products of our company, can form a complete producing line. Also this machine can work alone.
- The machine works reliably, operates easily, and is strongly adaptable to various kinds of bottles. For different kinds of bottles, users may only need to change several but very few parts which include screwing heads and the star plate. It is flexible.
Major Technical Parameters:
Type |
spiral screw type |
aluminum cap roll thread crush type |
aluminum cap crush type |
plastic cap crush type |
|
Model |
GMP-PM-024-A |
GMP-PM-024-B |
GMP-PM-024-C |
GMP-PM-024-D |
|
Capacity |
40-50 bottles/min |
||||
Cap Diameter |
Φ 25-Φ 60mm |
||||
Vessel Diameter |
Φ30-Φ90mm |
||||
Vessel Height |
50-200 mm |
||||
Compressed Air Pressure |
0.4-0.6 Mpa |
/ |
0.4-0.6 Mpa |
||
Air Consumption |
100 L/min |
/ |
80 L/min |
||
Power Consumption |
1.2 kw |
1.0 kw |
|||
Power Supply |
3PH AC 380V 50-60Hz |
||||
Dimensions |
2400×900×1800mm |
||||
Weight (kg) |
650 |
620 |
600 |
550 |
Products>Packing Machine>Capping Machine>
GMP-PM-025 SERIES CAPPING MACHINE
Brief introduction:
GMP-PM-025 is a high speed capping machine, which our company has developed based on the former 8-head model through referring similar model in domestic market. It is suitable for the capping of round glass bottle and plastic bottles. It is used in pharmaceutical industry, light
industry and chemical industry.
Production capacity:
GMP-PM-025 type capping machine 7ml vial 300-320bts/min
GMP-PM-025-A type capping machine 7ml vial 220-250 bts/min
Working principle:
This machine consists of turntable,conveyor,star wheel,aluminum cap oscillator and its track,bottle holder,single knife 10 head capping head, bottle outlet track and electric control system. It utilizes the positioning and the rotating of bottle holder and capping knife roller to conduct the capping process.
The bottles comes through turntable, conveyor and the screw conveyor to feed,then to the bottle holder and capping knife roller to be positioned. Then,
by the force of the gear, the capping head will push the lower edge of the cap so that the bottle is sealed. finally, the bottles will be pushed out one by one.
Characteristic:
Built-in turn table, running is stable. Qualified capping ratio is high and the adjusting of the capping head is easy.
Bottle feeding, capping and bottle out is done automatically, can be used as single machine
Simple structure and appearance; easy operation, maintenance and cleaning.
Falling bottle auto rejected in the turntable,machine alarms when bottle falls in the track;no bottle,no cap-adding;machine auto stops
when insufficient cap
Speed is adjusted by inverter
Easy to change the change part, aluminum cap oscillator and capping head can be operated by handwheel
Optional acrylic glass hood
Parameter
Bottle spec. |
2-30ml vial or plastic bottle |
Auto cap-adding ratio |
≥99.7% |
Qualified capping ratio |
≥99.5% |
Bottle breakage ratio |
≤0.5% |
Power supply |
220V, 50Hz |
Power |
1.5Kw |
Single machine noise |
≤70db |
Weight |
About 400kg |
Dimension |
1540x1250x1520 mm |
Products>Packing Machine>Capping Machine>
GMP-PM-026 SERIES CAPPING MACHINE
Brief introduction:
GMP-PM-026 type capping machine is a new generation high speed capping machine which our company has developed based on the former 10 head and 12 head model and referring to the similar machine in overseas market. It is suitable for the capping of round glass bottles and plastic bottles. It is used in pharmaceutical industry, light industry and chemical industry.
Production capacity:
7Ml vial 320~350 bts/min
Working principle:
This machine consists of turntable, plastic chain plate conveyor, screw conveyor, aluminum cap oscillator and its track, bottle holder, capping head, bottle outlet track and electric control system. It utilizes the positioning and the rotating of bottle holder and capping knife roller to conduct the capping process.
The bottles come through turntable, conveyor and the screw conveyor to feed, then to the bottle holder and capping knife roller to be positioned. After that, the bottle will be capped by the force of the cam and be pushed out one by one.
Characteristic:
High production capacity, stable running,high qualified capping ratio, 10 head flexible capping, bottle breakage ratio is low and suitable bottle range is wide.
Bottle feeding, capping and bottle out are done automatically, can be used as single machine or part of the production line.
Simple structure and appearance; easy operation, maintenance and cleaning.
Falling bottle auto rejected in the turntable, machine auto stops when bottle falls in the track; no bottle, no cap-adding; machine auto stops when insufficient cap
Speed adjustable by inverter
Easy to change the change part, aluminum cap oscillator can capping head height adjustable
Optional acrylic glass hood, 100-class laminar flow
Parameter
Bottle spec. |
2-30ml vial or plastic bottle |
Auto cap-adding ratio |
≥99.9% |
Qualified capping ratio |
≥99.7% |
Bottle breakage ratio |
≤0.1% |
Power supply |
220V, 50Hz |
Power |
1.6Kw |
Single machine noise |
≤70db |
Weight |
About 400kg |
Dimension |
2110x1250x1520 mm |
Products>Packing Machine>Capping Machine>
GMP-PM-027 SERIES CAPPING MACHINE
Brief introduction:
GMP-PM-027 is the first generation of roller capping machine which our company has developed by referring the similar product in domestic market. After several innovation, it is deeply welcomed by pharmaceutical factory users.It is suitable for the capping of round glass bottle and plastic bottle. It is used in pharmaceutical industry, light industry and chemical industry.
Production capacity:
7Ml vial 100~120 bts/min
Working principle:
This machine consists of turntable, conveyor, guaduator, aluminum cap oscillator and electric control system etc.
Bottle is feeding by turntable and conveyor, bottle positioning by guaduator. The capping head move up and down and rotate at the same time to seal the aluminum cap with the help of the graduator.
Characteristic:
Built-in turn table, running is stable.Qualified capping ratio is high and capping head height adjusting is easy.
3-Knife flexible capping, bottle breakage ratio is low,suitable bottle range is wide.
Bottle feeding, capping and bottle out are done automatically, can be used as a single machine
Simple structure and appearance; easy operation, maintenance and cleaning.
Speed adjusted by inverter.
Easy to change the change part, aluminum cap oscillator can capping head height adjustable
Optional acrylic glass hood
Parameter
Bottle spec. |
2-250ml vial or plastic bottle |
Auto cap-adding ratio |
≥99.9% |
Qualified capping ratio |
≥99.9% |
Bottle breakage ratio |
≤0.1% |
Power supply |
380V, 50Hz |
Power |
1.2Kw |
Single machine noise |
≤70db |
Weight |
About 300kg |
Dimension |
1520x900x1400 mm |
Products>Packing Machine>Capping Machine>
GMP-PM-028 semi-automatic capping machine
GMP-PM-028 semi-automatic capping machine is developed by our company for institute of scientific research and small production unit. This machine can be put on the working table to conduct capping and sealing. It is suitable for all bottle sealing of all preparations. It is widely used in pharmaceutical, chemical industry, light industry and research institute. GMP regulations and requirements.
Parameter
Suitable bottle range |
2-250ml |
Power supply |
220V 50Hz |
Power |
0.12Kw |
Weight |
20kg |
Dimension |
300x200x400 mm |
Products>Packing Machine>Packaging Machine>
Automatic Double-side Aluminum Foil Packing Machine
automatic double-side aluminum Foil Packing machine is a new type one that we adopt automatic control technology and then create and design ,It has the characteristics such as high technological content.novel structure.high efficiency,low noise,conveniently manipulating and mending ect.it is suit able for packing of troche,capsule and electronic component of vocations such as pharmacy,electron and food.etc.and it is also suitablt for the packing of nubby objects such as candy.etc.it has a good photo phobic and sealed function.it adopts PLC control ,its procedures such as filling,hot sealing,printing batch code,cutting,adjusting procedure,etc.Can be randomly set.it can not be limited by common type machine's machinery ranking gear,speed prop
-ortion.So the work will more convenient,the speed of packing will be high,the effect of the packing will be better.
Specifications:
Capacity: |
3-6.5 Thous pieces/hour |
Punching Frequency: |
30-60 Time/min |
Total Power: |
220V 50Hz 2Kw |
Air-compressd: |
0.4-0.7MPa |
Air-consumption: |
≥0.1m/min |
Weight: |
450Kg |
Overall Dimensions: |
1200×850×1700mm |
Dimensions of packing Box: |
1300×1000×1800mm |
Products>Packing Machine>Packaging Machine>
Blister Packaging Machine:
Blister Packaging machine collection light,machine,electricity,gas as incorporator.have PLC program control ,servo pulling ,photography detecting,VS printing photoelectric,security cover,it can automatic accomplish forming,feeding,sealing,pressing,cutting etc.this machine suit for (AL/PVC,AL/AL,AL/AL/AL)pacing of pharmacy,foodstuff ,electron,medicine treatment,metals goods,The collocate will according to custom request:Siemens electricity of Germany,servo pulling of panasonic.Festo pneumatic component of Germany,watt photography technical of Japan,and so on.
Specifications:
Cutting frequency: |
20-240 plates/min |
Productivity: |
1800-236000 pieces/h |
Max.forming depth: |
160mm×240mm |
Max.forming depth: |
26mm |
Adjusting range of travel: |
40mm-160mm |
Size of standard plate: |
80×67mm |
Width and thickness of PVC and PTP: |
PVC:250×0.15-0.45mm PTP:250×0.02-0.03mm |
Power supply: |
380V 50HZ,Main motorl1.5KW,Hot-sealing 4.5KW |
Capacity of air compressor: |
≥0.2m3/min |
Cooling of mold: |
Tap water or cycling water,60L/H |
Overall size: |
3500×1200×1800mm |
Weight: |
1680kg |
Products>Packing Machine>Packaging Machine>
Microcomputer Packaging Machine
Function:
The process of measuring, bag-making, filling, sealing,printing and cutting can be done automatically.
The packaging machine can pack many kinds of material such as grain, powder, liquid and tablet, etc.
Packaging Material:
Various Laminate Film, for example: Polypropylene / Polythene, Polyester/Aluminium foil/Polythene,Polyester/Aluminium-plating/Polythene, Nylon/ Polythene,Polyester/Polythene,etc.
Technical Features:
- Adopts CPU to control each function states, and setup the man-machine conversation interface.
- The Double channel temperature of the horizontal and vertical is controlled by intelligent temperature controlling device.
- Intelligent photo cell orientation, transform discretionarily between the light/shade. Strongly anti-jamming, when two bags can’t catch up with the upper mark the machine will stop and give an alarm.
- The packaging speed can be adjusted continuously within specified range. Orientation open mouth and stop.
- The bag-making has high precision. Easily Operation and maintain.
- Measurement adopts adjustable cup method,which is accorded with the national measurement standard.
Purpose:
Grain kind: The thin grain material such as leechdom of dosage or pill kind, sugar, coffee, fruit grain, tea, monosodium glutamate, salt, desiccant, seed, etc.
Technical Parameter:
Pouch length: 50~120 mm;
Pouch width: 60~85 mm;
Packaging speed:55~80 Bag/min(Depend on the material and specifications)
Filling Capacity:10~50 ml;
Seal Style:3-side;
Measuring Method:Cup;
Consumption power: Approx. 0.86 Kw / AC380V;
Dimension: 730 mm(L)X 630 mm(W)X 1580 mm(H);
Weight: Approx. 180 Kg
Optional devices:
- The above machine may be changed into 4-side-sealing and equiped with hot stamp imprinting machine.
- It is choice to be shaking matter-delivering mechanism, stirring mechanism, hackle cutters, point line cutters, easy-tearing cutters and exhaust.
- It is choice to be both heat-sealing mechanism and net or even heat-sealing channel veins.
- The machine that has special bag-size or measuring requirement can be devised and produced specially.
Products>Packing Machine>Tester>
GMP-SSM-001 Set of equipments of cream vacuum emulsification
Characteristic
The machine has easy operation, steady capability, good homogeneity, high efficiency, reasonable structure, small volume and high automation level and easily clean.
Advantage
The machine has triple blender, hydraulic lift cover, high-speed homogeneity blender(speed is 0-3500 r/min, frequency speed regulation). Fast-cutting vortex emulsification blender is used in the homogeneity part, which can scrape in a low speed and automatically blend and snuggle up to the bottom and wall of boiler. The machine draws powder material by the way of vacuum in order to prevent the powder flying. The whole working procedure is operated in the condition of vacuum in order to prevent the material coming into being bubble after high-speed blending and reach the request of sanitation and asepsis. CIP cleaning system is equipped in this system. The contact part of vessel and material is made from SS316L material. Mirror finish of the inside surface is 300emsh. In order to ensure the stabilization of the control, the vacuum pump is the products of Germany Siemens Company, the button is produced by Japan Fuji Company, the transducer is the product of Japan Matsushita Electric Industries and the electro-con trol part is the product of Siemens Company. The machine is made completely according to GMP request, which is the most perfect cream production equipment.
Usage
GMP-SSM-001 vacuum emulsification blender is specially designed adopting advanced technology of Oversea according to the cosmetic and ointment production technology. The machine is made up of pretreatment boiler, vacuum pump, hydraulic system, pouring-out system, elect-rocontrol system and worktable.
Model |
Effective capacity |
Emulsify |
Agitator |
Outside dimension |
Total power |
|||||
Kw |
r/min |
Kw |
r/min |
length |
width |
height |
Max H |
|||
GMP-SSM-001-20 |
20 |
2.2 |
0-3500 |
0.37 |
0-40 |
1800 |
1600 |
1850 |
2700 |
5 |
GMP-SSM-001-50 |
50 |
3 |
0-3500 |
0.37 |
0-40 |
2700 |
2000 |
2015 |
2700 |
7 |
GMP-SSM-001-100 |
100 |
3 |
0-3500 |
0.37 |
0-40 |
2920 |
2120 |
2200 |
3000 |
10 |
GMP-SSM-001-150 |
150 |
4 |
0-3500 |
0.37 |
0-40 |
3110 |
2120 |
2200 |
3100 |
11 |
GMP-SSM-001-200 |
200 |
5.5 |
0-3500 |
0.37 |
0-40 |
3150 |
2200 |
2200 |
3100 |
12 |
GMP-SSM-001-350 |
350 |
7.5 |
0-3500 |
0.37 |
0-40 |
3650 |
2650 |
2550 |
3600 |
17 |
GMP-SSM-001-500 |
500 |
7.5 |
0-3500 |
0.37 |
0-40 |
3970 |
2800 |
2700 |
3950 |
19 |
GMP-SSM-001-750 |
750 |
11 |
0-3500 |
0.37 |
0-40 |
3780 |
3200 |
3050 |
4380 |
24 |
GMP-SSM-001-1000 |
1000 |
15 |
0-3500 |
0.37 |
0-40 |
3900 |
3400 |
3150 |
4550 |
29 |
GMP-SSM-001-1500 |
1500 |
18.5 |
0-3500 |
0.37 |
0-40 |
4000 |
4100 |
3750 |
5650 |
42 |
GMP-SSM-001-2000 |
2000 |
22 |
0-3500 |
0.37 |
0-40 |
4850 |
4300 |
3600 |
Without lift |
46 |
Products>Packing Machine>Tester>
Ointment or liquid filling, capping machine series
Introduction
GMP-SSM-002 ointment tube filling and sealing machinery choose patent filling system, the filling valve is controlled by bearing, which make the gap between the rotary shaft and the tube. The rotary shaft and tube is made of special material, couldn’t touch with each other, no frication, so the filling precision is high. The filling speed and time could be controlled on the HMI. No bubble, no splash, no leakage.
GMP-SSM-002 ointment tube filling and sealing machinery is automatic double with two working line. The transmission system use the advanced transmission technology combined the domestic situation. Cam is made of forged steel which with a long life. Germany made guiding device, air cylinder offer the constant elasticity for the cam. The synchronic belt is the most advanced technology in the world. With PLC control, touch screen operation. Cam and pneumatic unit control the machine moving, inverter adjust the speed. The running is stable, filling precision is high. The working platform don’t need lubrication oil, less contamination; key parts choose imported bearing, reducer is made in Italy. Germany torque control slipper clutch could prevent the overload. Italy synchronic belt can ensure the high rotating speed. Imported sealing ring ensure no leakage. The structure of whole machine is reasonable, with advanced configuration, failure display in Chinese and English. The operation is simply, easy for maintenance and clean. It can be used as single machine, and also can be used in the production line.
Main electronic part: Full set SIMENS system to ensure the stability of the system, pneumatic product is international brand such as metalwork. The sensor is also international brand, such as OMRON, the protection switch is also international brand, such as Schmersal..
Main parameter list
Sr No. |
Item |
Technique parameter |
||||
1 |
Pipe diameter(mm) |
10~50 |
||||
2 |
Color code(mm) |
±1.5 |
||||
3 |
Filling dosage(ml) |
1.5~300 |
||||
4 |
Filling precision (%) |
≤0.5 |
||||
5 |
Sealing method |
Type A: steel pipe |
Single side folding |
|||
Type B: plastic pipe, multi-material pipe |
end-capping |
|||||
6 |
Max speed |
GMP-SSM-002-a |
140 |
|||
GMP-SSM-002-b |
170 |
|||||
GMP-SSM-002-c |
220 |
|||||
7 |
Pipe material |
Metal pipe, plastic pipe, multi-material pipe |
||||
8 |
Filling material |
Aqueous stream and oleo past |
||||
9 |
(Kw) |
Type A: steel pipe |
6 |
|||
Type B: plastic pipe, multi-material pipe |
14 |
|||||
10 |
power |
380V 50Hz |
||||
11 |
Air pressure |
0.6Mpa |
||||
12 |
(m3/h) |
Type A: metal pipe |
10-20 |
|||
Type B: plastic pipe, multi-material pipe |
60-90 |
|||||
13 |
(l/min) |
Type B: plastic pipe, multi-material pipe |
8 |
|||
14 |
(Kg) |
KFC140 |
3500 |
|||
KFC170S |
4500 |
|||||
KFC220S |
4500 |
|||||
Products>Packing Machine>Tester>
YD-1 Tablet hardness tester
Tablet hardness testers are instruments for detecting breaking hardness of tablet.
Features
The tablet is loaded and pressed artificially.
It has high accuracy press sensor and hardness data is displayed on LED.
It tests tablet hardness continuously.
Test data is displayed and locked automatically, so can test be reset and cycled.
Automation: auto-test, auto-diagnose, auto-alarm
Parameter
Hardness range: (2-199.9) N
Hardness accuracy: ±0.5N
Moving distance of probe: 20mm
Power: 220V/50Hz/10W or 110V/60Hz/10Kw
Dimension: (320 x 200 x 100) mm3
Weight: 5kg
Products>Packing Machine>Tester>
RC-3 Dissolution tester
RC series instruments are used for detecting velocity and extent of pharmic dissolution from tablet, capsule etc in prescriptive menstruum.
Application standard
National standard (Chinese codex)/2005/
Corporate standard (Dissolution tester)Q/12XQ0187-2004
Features
It has three vessels and three poles arranged on one line.
The head part of the instrument can be artifically turned over smoothly and flexibly.
The basket units and paddle units are made of imported stainless steel (SUS316L)
The magnetism-pumped circular water current can heat the system evenly, and the bath liquid can achieve an equal temperature.
A MPU is used in dissolution tester automatically control the temperature, rotational speed and time, and ther parametres can be preset at any time.
It can be operated conveniently by keystroke. The measurement result is displayed by LED. The preset and real data can be displayed alternately in time.
Automation: auto-test, auto diagnose, auto-alarm.
It can test by self and alarm automatically. The dissolution parameters of “Chinese codex 2005” are stored in and can be taken out at anytime.
Time can be preset at many points. The beeper sounds automatically to any point, and then the tester automatically runs to the next one.
Parameter
Speed range: (200~200)rpm
Speed accuracy: ±2rpm
Temperature range: ambient to +45.0℃
Temperature stability: +0.3℃
Preset timing: (5~900)min
Time accuracy: ±0.1%
Paddle radial run-out: ±0.5mm
Basket radial run-out: ±2.0mm
Power: 220V/50Hz/600W
Dimension: (460×300×480)mm3
Weight:35kg
Products>Packing Machine>Tester>
BJ-2 Disintegration tester
BJ series of instruments are used for detecting disintegration of solid in prescriptive conditions.
Applicable standards
National standard (Chinese codex) /2005/
Corporate standard (Disintegration tester)Q/12XQ0188-2004
Features
There are twelve tubes in two basket assemblies
Each test station is driven independently. Auto stop at timing point.
The bath liquid can achieve an even temperature.
A MPU is used to automatically control the temperature, time and frequency of nacelle up and down.
Parameters can be preset at anytime. The preset and real data can be displayed alternately in time.
Automation: auto-set, auto-diagnose, auto-alarm
Parameter
Basket assemblies: 2
Nacelle up and down frequency: (30-32)/min
Nacelle up and down range: (55±1)mm
Automatic time range: (1-900) min
Temperature range: ambient to 45.0℃
Accuracy of controlling temperature: ±0.5℃
Power:220V/50Hz/600W or 110V/60Hz/600W
Dimension: (400 x 300 x 420) mm3
Weight: 16kg
Products>Packing Machine>Tester>
CS-1 Tablet friability tester
CS-1 tablet friability tester is used for detecting friability/abrasion of tablet.
Applicable standards
National standard (Chinese codex)/2005/
Corporate standard (Tablet friability tester)Q/12XQ0189-2004
Features:
Two drums run synchronously. Auot stop at timing point.
The drum is made of high quality hyaline acryl.
The speed and revolution of the drum can be preset at any time, either preset or real data is displayed on the LED.
A MPU is used to control all operations, high accuracy is achieved in testing rotary speed and circle number.
Automation: auto-test, auto-diagnose, auto alarm.
Parameter
Cylinder number: 2
Cylinder radius: Φ286mm
Cylinder depth: 39mm
Tablet fall height: 156mm
Rotation count: (10~900) r
Rotation count accuracy: ±1r
Rotation speed: (20~900) rpm
Rotation accuracy: ±1rpm
Power: 220V/50Hz/60W or 110V/60Hz/60W
Dimension: (370×300×340) mm3
Products>Packing Machine>Tester>
RY-1 Melting point tester
Melting point is the temperature of something turning to liquid from solid. Testing it is the main method to detect some characters such as purity etc.
RY series are suitable for testing Melting points of drug
Applicable standard
Corporate standard (Melting point tester) Q/12XQ0185-2004
Features
Test temperature with standard mercury theromometer.
Adjust heating voltage by a knob.
Display voltage with a analog voltmeter.
Observe Melting sample by a magnifier.
Test three samples at once.
Parameter
Range of melting point: (50-300) ℃
Accuracy: ±1.0℃
Usage temperature: (15-35) ℃
Rate: (1.0/2.0/4.0/6.0) ℃/min
Power of the heater: 100W
Power: 220V/50Hz/100W
Dimension: (190 x 120 x 200) mm3
Weight: 3kg
Products>Packing Machine>Tester>
SF-1 Fast moisture tester
SF series are suitable for testing water in powder or granule.
Applicable standards
National standard Chinese codex /2005/
National standard (Food additive Gelatin) GB6783-94
Corporate standard (Fast moisture tester) Q/12XQ0191-2004
Features
Drying in constant temperature with infrared lamp, heat being focused. Drying fast.
High-precision temperature sensor, auto frequency-conversion control technology, high accuracy in controlling temperature.
High-precision weight sensor, high accuracy in weighing
Auto-test lost weight in drying, auto-calculate remainder water after weight being constant.
Auto-preset drying temperature, auto-test moisture, display preset and real-time data alternately in time.
Automation: auto-test, auto-diagnose, auto-alarm
Parameter
Tested Moisture range: (0-99.9) %
Moisture testing accuracy: ±0.5%
Drying temperature: (50-105) ℃
Temperature accuracy: ±2℃
Weight testing range: (0-19.99) g
Weight testing accuracy: ±0.02g
Sample weight: (4-6) g
Infrared lamp: 220V/250W
Power: 220V/50Hz/300W
Dimension: (400 x 300 x 420) mm3
Weight: 8kg
Products>Packing Machine>Tester>
PJ-3 tablet four-usage tester
It has four fuctions: detecting pharmic dissolution, disintegration, friability/abrasion and hardness of tablet.
Applicable standards:
Naitonal standard (Chinese codex)/2005/
Corporate standard (Dissolution tester)Q/12XQ0187-2004
Corporate standard (Disintegration tester)Q/12XQ0188-2004
Corporate standard (Tablet friability tester)Q/12XQ0189-2004
Corporate standard (Tablet hardness tester)Q/12XQ0186-2004
Features:
Intellectualized, auto-control, auto-test, auto-diagnose, auto-alarm
The circular water current pumped by magnetism pump can heat the system equally, and the bath liquid can achieve an even temperature.
Temperature is high accurately auto-controlled.
Auto stop at timing point.
Parameters can be preset at any time, the preset and real data are displayed alternately in time.
It has three vessel and three poles arranged on one line. The heatd part of the instrument can be artificially turned over smoothly and flexibly.
Two disintegrations run synchronously. Auto stop at timing point.
The basket units and paddle units are made of imported stainless steel (SUS316L)
The hardness has high accuracy press sensor and hardness data is displyed in Newton.
It tests tablet hardness continuously. The tablet is loaded and pressed artificially.
Auto-disply, auto memorize, auto-retest.
Parameter
Temperature range: (ambient to +45.0℃) ±0.3℃
Speed range: (20-200)rpm ±2rpm
Automatic time range: (1-900)min ±0.5min
Stations of dissolution: 3
Paddle radial run-out: ±0.5mm
Basket radial run-out: ±1.0mm
Basket assemblies: 2
Nacelle up and down frequency: (30-32)/min
Nacelle up and down range: (55±2) mm
Drum:1
Drum’s size radius: dia 286mm depth:39mm
Hardness range: (2-200) N
Probe procession range: (3-20)mm
Power: 220V/50Hz/600W or 110V/60Hz/600W
Dimension: (590 x 300 x 480)mm3
Products>Sterile>Lyophilizer>
LyoUltra Series
LyoUltra is the lyophilizer with adavanced configuration , all profound & modern devices are equipped such as self-filling door, automatic sampler, Ni-refrigeration, rotary screw compressor and wireless temperature detection etc. Compare with the LyoBasic, its extra features are as bellows:
Door seal: One-piece fabrication, seal guaranteed. Gate slot is one-piece fabricated which is more durable for pressure & distortion. | The auto-sampling technology is an automatic process without damaging the product during drying process. |
Wireless temperature detection technology, different from traditional sensor. |
|
|
03 |
07 |
10 |
15 |
20 |
25 |
30 |
Useable surface area |
M2 |
3.24 |
6.48 |
9.72 |
16.1 |
19.7 |
25.1 |
29.6 |
Ice capacity |
kg |
65 |
140 |
216 |
360 |
488 |
586 |
780 |
Shelf dimension |
mm |
900 |
1200 |
1200 |
1495 |
1495 |
1495 |
1495 |
Useable shelves |
Piece |
6 |
6 |
9 |
9 |
11 |
14 |
11 |
Shelves distance |
mm |
100 |
||||||
Shelves temperature range |
℃ |
-55~+80℃ |
||||||
Ultimate condenser temperature |
℃ |
-75℃ |
||||||
Ultimate vacuum |
Pa |
0.5 |
||||||
Pure steam consumption |
Kg/hr |
39 |
78 |
123 |
157 |
216 |
258 |
332 |
CIP water consumption(≥4bar) |
L/min |
84 |
126 |
170 |
198 |
211 |
230 |
252 |
Power supply |
Kw |
35 |
57 |
83 |
102 |
126 |
167 |
186 |
Cooling water consumption |
T/hr |
6 |
10 |
17 |
23 |
25 |
31 |
36 |
Compressed air consumption |
M3/min |
0.1(6~8Bar) |
||||||
Footprint (LxWxH) |
mm |
4100 |
5100 |
5100 |
5900 |
5900 |
6400 |
6900 |
Weight |
T |
7 |
9 |
13 |
16 |
18 |
20 |
22 |
Products>Sterile>Lyophilizer>
LyoBasic Series
LyoBasic is the product with standard configuration . The machine is full-closed design; it targets major-ity domestic market by its low cost and GMP compliance.
Mushroom valve, as the main valve of the machine, its easy change of seal gasket brings more convenience.
The self locking device is configured to ensure locking status during system without compressed air.
All the sanitary pipelines are soldered by auto-welders, valves are from Burkert or Tyco.
Optional control system for the customer, Omron or Siemens PLC. Optional international brand in relays, contactor and PC.
|
|
07 |
10 |
15 |
20 |
25 |
30 |
40 |
|||||||
Useable surface area |
M2 |
6.48 |
9.72 |
16.1 |
19.7 |
25.1 |
29.6 |
40.3 |
|||||||
Ice capacity |
Kg |
140 |
216 |
360 |
488 |
586 |
780 |
975 |
|||||||
Shelf dimension |
mm |
1200 |
1200 |
1495 |
1495 |
1495 |
1495 |
1495 |
|||||||
Useable shelves |
Pieces |
6 |
9 |
9 |
11 |
14 |
11 |
15 |
|||||||
Shelves distance |
mm |
100 |
|||||||||||||
Shelves temperature range |
℃ |
-55~+80℃ |
|||||||||||||
Ultimate condenser temperature |
℃ |
-75℃ |
|||||||||||||
Ultimate vacuum |
pa |
1 |
|||||||||||||
Pure steam consumption |
Kg/hr |
78 |
123 |
157 |
216 |
258 |
332 |
486 |
|||||||
CIP water consumption(≥4bar) |
L/min |
126 |
170 |
198 |
211 |
230 |
252 |
280 |
|||||||
Power supply |
Kw |
57 |
83 |
102 |
126 |
167 |
186 |
198 |
|||||||
Cooling water consumption |
T/hr |
10 |
17 |
23 |
25 |
31 |
36 |
42 |
|||||||
Compressed air consumption |
M3/min |
0.1(6-8bar) |
|||||||||||||
Footprint |
mm |
5900 |
6000 |
7000 |
7500 |
7500 |
7500 |
9820 |
|||||||
Footprint |
mm |
5700 |
5800 |
6800 ×4280 |
7300 |
7400 |
7400 |
9700 |
|||||||
Weight |
T |
8 |
11.5 |
14.5 |
16.5 |
18.5 |
20.5 |
25 |
Products>Sterile>Bottle Washing Machine>
GMP-SEM-003 SERIES BOTTLE WASHING MACHINE
Brief introduction:
GMP-SEM-003 series is the product which our factory has large output for the passed many years. It is deeply favored by pharmaceutical factories. Its advantages: simple structure, easy operation, easy to clean low cost. It can be used for washing of molded vial and big volume plastic bottle. Scandalized parts can be easily changed.
production capacity:
We can supply a complete set according to the users’ requirements.
Working principle:
This machine consists of turntable, bottle twisted track and coarsely washing and finely washing tank. Coarsely washing is conduct by the power of ultrasonic wave to wash the inner and outer wall of the bottles. Finely washing use purified water, wfi and compressed air to wash the inner and outer wall of the bottles alternately. It can reach the qa standard of pharmaceutical companies.
Washing process: the turntable pushes the bottles into the star wheel then to the bottle twisted track. With the help of star wheel, the bottles rotate 360 degree in the track, and rinsed by water and air. Finally, the bottles will be pushed into the tunnel oven or reclaiming tray.
Characteristic:
Ultrasonic wave can clean the wall of the vial, the cleaning effect is good, and the speed is adjustable by inverter.
Clean compressed air water can wash the wall of the vial thoroughly.
Structure is compact; volume is small with stainless steel water tank. The washed water can be used as recirculation water after filtering. The cleaning effect is good and the cost is low.
Easy operation and fully automatic control.
Can suits vials with different spec. The change part is easy to change.
Can use as single machine or part of the production line
Parameter:
Suitable bottle range |
2~250ml bottle, (separate box for 2~20ml and 30~250ml. different bottle size equip different track) |
Power supple |
380V 50Hz |
Power consumption |
6.2kw |
Ultrasonic wave power |
2kw |
Wfi pressure |
0.2~0.35 MPa 300~400l/h |
Purified water pressure |
0.2~0.35 MPa 400-500l/h |
Compressed air |
0.5~0.6MPa 40m3/h |
Single machine noise |
≤70db |
Weight |
500Kg |
Dimension |
2780×840×1750(mm) |
Products>Sterile>Bottle Washing Machine>
GMP-SEM-004 SERIES BOTTLE WASHING MACHINE
Brief introduction:
GMP-SEM-004 series rotary vial washing machine is small washer which our company recommends to our customer in recent years. It is suitable for small batch production and sample drug production in laboratory. The suitable bottles are ampoules, vials, plastic bottles and straight bottles.
Production capacity
1-2ml 100-120 ampoules/min
5-10ml 100ampoules/min
20ml 60 ampoules/min
Working principle:
This machine consists of conveyor, bottle feeding manipulator, water and air filter and washing needle. Coarsely washing is conducted by the first 2 working station to wash the inner and outer wall of the bottles. Finely washing use purified water, wfi and compressed air to wash the inner and outer wall of the bottles alternately. It reaches the qa standard of pharmaceutical company for packing bottles.
Washing process: the bottles come through conveyor, screw conveyor, star wheel and then to the pliers in the turntable. The manipulators will rotate the bottles by 180 degree, and then the needle will spray water and air alternately by tracing the bottles. Finally, the manipulators will rotate the bottle by 180 degree again and then push them to the bottle reclaiming tray.
Characteristic:
Small volume, easy operation.
Water and air come through separate 0.2M and 0.45M filter, clean degree is high.
“3 Water,3 air”alternated rinser designing more reasonable.
Contact part with water and air is made of stainless steel or silicone rubber and ptfe, no peel off or contamination.
Wfi water consumption is low, can used as circulation water.
Comply with gmp requirements.
Parameter:
Suitable bottle range |
1,2,5,10,20ml (ampoule, plastic bottle, vial, liquid bottle) |
Power supple |
380V 50Hz |
Total power |
1 kw |
Purified water, Wfi pressure |
0.25 mpa |
Purified water consumption |
0.7m3/h |
Purified water consumption |
0.35m3/h |
Clean compressed air pressure |
0.3-0.4mpa |
Clean compressed air consumption |
40m3/h |
Single machine noise |
≤70dB |
Weight |
600kg |
Dimension |
1450×1560×1300(mm) |
Products>Sterile>Bottle Washing Machine>
GMP-SEM-005 Series Rapid Cooling Sterilizer
This series is a new-generation pressure steam sterilizer,automatically controlled by program with double rectangular stainless steel doors.It can automatically draw and record the curves of temperature and time,and it also has functions of presetting,displaying and printing F values.This equipment adopts high performance PLC testing control,two operating systems (manual and automatic)and standard interfaces qualified by GMP.With the following advanced functions, lick pre-vacuum,high temperature quick sterilization quick cooling after sterilization and special anti-pressure protection device, thes equipment can reliabyly sterilize all kinds of damp-heat resisting products in bulk,bottle,can and soft package.
Main Parameters & Utilities
Design pressure |
0.245Mpa |
Vacunm |
-0.095Mpa |
Working Pressure |
0.22Mpa |
Steam Source Pressure |
0.4-0.6Mpa |
Design Temperature |
139℃ |
Water Source Pressure |
0.1-0.3Mpa |
Working Temperature |
134℃ |
Compressed Air Pressure |
0.5-0.7Mpa |
Heat Equilibrium |
≤±1℃ |
|
Structure & Capability & Characteristics
- The box is designed, produced and tested strictly according to the《 Steel Pressure Vessel》
- Pneumatic translational door,easy to operate,flexible
- Elegant stainless steel decorate cover
- The GMP confirmation access is fixed on the equipment
- The unique dove-tail inlaid design of heat-resisting silicone rubber gasket ring ensures the seal tighthess of the door.
- The main control system adopts micro-computer PlC+touch screen DCS +long distance tiring-room monitoring system
- The heat preservation layer is made by polyurethane material and pearl rock wool Constituted frame sterilizing cart
- Excellent rapid cooling device
Size & Utilities
Spicifications |
Overall Dimensions |
Chamber Size |
Power |
|
|
Cooling Water consumpation |
Net Weight |
GMP-SEM-005-A |
1695×1370 |
1500×750 |
3 |
1 |
2 |
800 |
1900 |
GMP-SEM-005-B |
3195×1370 |
3000×750 |
5.5 |
2 |
4 |
1500 |
2800 |
GMP-SEM-005-C |
2235×1800 |
2000×1000 |
5.5 |
2.2 |
2 |
1800 |
3500 |
GMP-SEM-005-D |
3635×1800 |
3400×1000 |
8 |
4 |
3 |
3000 |
4500 |
GMP-SEM-005-E |
5635×1800 |
5400×1000 |
8 |
6 |
5 |
4500 |
7500 |
GMP-SEM-005-F |
6935×1800 |
6700×1000 |
10 |
8 |
6 |
5500 |
9800 |
Note:The loading above is just for reference,the actual loading will be different because of the loading method and bottle sizes.
Products>Sterile>Bottle Washing Machine>
GMP-SEM-006 Series Multtifuonal Chinese Medicine Sterilizer
Former sterilization for Chinese herbal medicine usually adopts cobalt60,ethylene oxide, alcohol;microwave,ozone etc.These methods are hard to guarantee medicine’s property,easy to have remains or lead to expensive coste.By testing, steam is the most suitable method for sterilizing herbal medicine.So we designed this series of sterilizers,with horizontal and rectangular shape.By means of in-and-out steam heating,the space of the cabinet can be fully utilized.Ln the cabinet, there is a special of dqmp proof equipment to eliminate effectively lump phenomena of herbal powder caused by traditional steam sterilization.It is applicable to Chinese Pharmaceutical Factores
Main Parameters & Utilities
Design pressure |
0.245Mpa |
Vacunm |
-0.095Mpa |
Working Pressure |
0.22Mpa |
Steam Source Pressure |
0.4-0.6Mpa |
Design Temperature |
139℃ |
Water Source Pressure |
0.1-0.3Mpa |
Working Temperature |
134℃ |
Compressed Air Pressure |
0.5-0.7Mpa |
Heat Equilibrium |
≤±1℃ |
|
Structure & Capability & Characteristics
- The box is designed, produced and tested strictly according to the《 Steel Pressure Vessel》
- National patent door interlock
- National patent sealing technology of inner gas
- Reliable and stable micro-computer PLC+touch screen control,advanced function for recording, printing and storing
- Elegant stainless steel decorate cover
- The heat preservation layer is made by polyurethane material and pearl rock wool
- The GMP confirmation access is fixed on the equipment
- Unique damp proof device
- Medical powder condition after sterilizing
Mould,microbial<10cfu/g
(Powder is inattentive and difficult to agglomerate(different breeds defferent condition)
Water contain≤3%(drying of the product)
Difficult to change color
Size & Utilities
Specifications |
Overall Dimensions |
Chamber Size |
Power |
Loading(kg) |
Car |
Cooling Water consumpation |
Net Weight |
GMP-SEM-006-A |
1195×1220 |
1000×600 |
1.5 |
60/40 |
- |
400 |
780 |
GMP-SEM-006-B |
1245×1300 |
1050×680 |
2.0 |
120/80 |
- |
500 |
1100 |
GMP-SEM-006-C |
1595×1300 |
1400×680 |
3.0 |
160/110 |
1 |
700 |
1300 |
GMP-SEM-006-D |
1695×1370 |
1500×750 |
3.0 |
250/180 |
2 |
700 |
1900 |
GMP-SEM-006-E |
3195×1370 |
3000×750 |
4.5 |
500/350 |
4 |
1200 |
2800 |
GMP-SEM-006-F |
3635×1800 |
3400×1000 |
7.5 |
1000/700 |
4 |
1600 |
4500 |
GMP-SEM-006-G |
5635×1800 |
5400×100 |
7.5 |
1600/1100 |
6 |
1600 |
7500 |
Products>Sterile>Bottle Washing Machine>
AM Series Ampoule Leak Sterilizer
This series is a kind of high-performance and high-intelligence equipment for sterilizing,leak detecting and cleaning,which adopts colorful touching screen and PLC,applicable to treating of ampoule,oral medicine, small infusion bottle,etc.After sterilization,by means of vacuum or vacuump plus water,the detecting rate of waster is assured to be 100%.Finally washing treatment is carried out with clean water to ensure surface of bottle clean and uncontaminated.
Main Parameters & Utilities
Design pressure |
0.245Mpa |
Vacunm |
-0.095Mpa |
Working Pressure |
0.22Mpa |
Steam Source Pressure |
0.4-0.6Mpa |
Design Temperature |
139℃ |
Water Source Pressure |
0.1-0.3Mpa |
Working Temperature |
134℃ |
Compressed Air Pressure |
0.5-0.7Mpa |
Heat Equilibrium |
≤±1℃ |
|
- The boxis designed,produced and tested strictly according to the 《teel Pressure Viessel》
- National patent sealing technology of inner gas
- National patent door interlock
- Reliable and stable micro-computer PLC+touch screen control,advanced function for recording, printing and storing
- Elegant stainless steel decorate cover
- The heat preservation layer is made by polyurethane material and pearl rock wool
- The GMP confirmation access is fixed on the equipment
- Unique spraying cooling device
Structure & Capability & Characteristics
Size & Utilities
Specifications Model |
Overall Dimensions |
Chamber Size |
Sream |
Power |
Compressed Air |
Car |
Net Weight |
AM-0.3 |
1195×1220 |
1000×600 |
55 |
3 |
0.5 |
- |
760 |
AM-0.6 |
1245×1300 |
1050×680 |
75 |
3 |
0.8 |
- |
1100 |
AM-1.2 |
1695×1370 |
1500×750 |
85 |
4 |
1.5 |
2 |
1900 |
AM-1.8 |
2445×1370 |
2250×750 |
100 |
4 |
2.0 |
3 |
2450 |
AM-2.5 |
3195×1370 |
3000×750 |
180 |
6 |
3.0 |
4 |
2800 |
AM-5.0 |
3635×1800 |
3400×1000 |
300 |
6 |
5.5 |
4 |
1500 |
Model |
1ml |
2ml |
5ml |
10ml |
20ml |
AM-0.3 |
32500 |
21000 |
8200 |
5500 |
33000 |
AM-0.6 |
64260 |
38880 |
17220 |
11160 |
6300 |
AM-1.2 |
127816 |
81664 |
33984 |
22400 |
11424 |
AM-1.8 |
191724 |
122496 |
50976 |
33600 |
17136 |
AM-2.5 |
255632 |
163328 |
67968 |
44800 |
22848 |
AM-5.0 |
605568 |
380160 |
158200 |
98208 |
50086 |
Products>Sterile>Bottle Washing Machine>
Purified water system
Purified water system is designed by our experienced and qualified water system engineers according to customer's URS. Adopting the world's most advanced membrane technology and EDI processing, the product water quality is completely complied with each countrie's standars for purified water.
|
Pure water |
USP requirements |
Conductivity (25℃) |
< 0.2 μs/cm |
< 1.3 μs/cm |
TOC |
< 50 ppb |
< 500 ppb |
Microbe |
< 10 cfu |
< 100 cfu |
Professional design(special design according to different countries,districts and user's speciffcations)
Water quality is complied with each standards of GMP,USP and EU pharmacopoeia.
Modular design. Modular design is accomplished by qualified engineer according to eah unit of the water system. Compact structure after-sales service.
Strict purchasing system of supplier. American Standard vendor rating criteia to ensure the reliability of the quality of each component.
Perfect automatic system. Adopt Siemens PLC automatic control technolgy, european perfect electronic control technology in order to make more reliable of the equipment.
Strict FAT test and commissioning. full Test will be done by qualified engineer in order to make every detailes perfect.
Products>Sterile>Bottle Washing Machine>
Multi-effect water distiller
The three level centrifuge and separation technology, Siemens S7 controlling system with Chinese and English operational languages is adopted in F series multi-effect water distiller. With standard collocated water inlet boosting pump and storage tank, buffer tank is optional. With standard collocated factory steam pressure-reducing valve. With device for discharging incondensable gas continuously. Discharging remained liquid continuously. Recording conductivity and valve position of WFI. With complete factory acceptance test for equipment manufacture.Adopting demineralized water or RO water for water inlet.
Technica-parameter for F-PROTM multi-effect water distiller
|
Steam actuating pressue:03.Mpa |
Steam actuating pressure:0.5Mpa |
|||||
Model |
MUMBER |
Capacity |
Industrial |
Cooling |
Capacity |
Industrial |
Cooling |
MS100 |
4 |
110 |
35 |
62 |
165 |
54 |
99 |
MS200 |
4 |
220 |
70 |
131 |
330 |
108 |
204 |
MS200 |
5 |
220 |
29 |
57 |
330 |
87 |
91 |
MS300 |
4 |
330 |
104 |
201 |
495 |
162 |
315 |
MS300 |
5 |
330 |
84 |
90 |
495 |
130 |
146 |
MS500 |
4 |
550 |
173 |
338 |
825 |
269 |
528 |
MS500 |
5 |
550 |
140 |
154 |
825 |
217 |
249 |
MS750 |
4 |
770 |
243 |
474 |
1155 |
377 |
741 |
MS750 |
5 |
770 |
196 |
218 |
1155 |
303 |
350 |
MS1000 |
5 |
1100 |
279 |
300 |
1650 |
433 |
480 |
MS1000 |
6 |
1100 |
234 |
68 |
1650 |
365 |
127 |
MS1500 |
5 |
1600 |
405 |
446 |
2400 |
682 |
713 |
MS1500 |
6 |
1600 |
340 |
111 |
2400 |
527 |
203 |
MS2000 |
5 |
2200 |
556 |
622 |
3300 |
863 |
991 |
MS2000 |
6 |
2200 |
467 |
164 |
3300 |
724 |
293 |
MS3000 |
6 |
3300 |
700 |
257 |
4950 |
1085 |
457 |
MS5000 |
6 |
5500 |
1164 |
457 |
8250 |
1805 |
799 |
Products>Sterile>Bottle Washing Machine>
Multi-effect distillation
MULTI-EFFCT DISTILLATION HAS BECOME THE MOST ACCEPTED PROCESS FOR THE PRODUCTION OF “W.F.I” IN PHARMACEUTICAL & BIOTECH INDUSTRIES AND HOSPITALS.
Fed by pure water, and heated by plant steam, multi-effect distillation can produce WFI of stable quality and high purity. The technology of multi evaporation makes effective heat consumption.
Column Construction
The construction of columns on multi-effect distillation is collocated-tube, falling film technology with centrifugal impurity and pyrogene separation. The feed water drops down at the inside of the evaporator tube where it is converted into pure steam. Special distributor makes the water goes down the tube in a membrane way and evaporate rapidly and the water-drop (moist form) in that pure steam is removed. The pure steam without water-drop then goes into next column as heat source and it is condensed as distillated water.
Model |
Columns |
Steam |
WFI Output |
Cooling Water Consume (Kg/h) |
Dimension |
Basic Machine Weigh |
Power |
GMP-WT-002-A |
4 |
0.3-0.55 |
50-75 |
33-49 |
830x580x1600 |
150 |
2 |
GMP-WT-002-B |
4 |
0.3-0.55 |
100-160 |
65-104 |
850x600x1800 |
270 |
2 |
GMP-WT-002-C |
4 |
0.3-0.55 |
200-320 |
120-205 |
1200x600x2300 |
400 |
2 |
GMP-WT-002-D |
4 |
0.3-0.55 |
300-490 |
194-320 |
1300x600x2400 |
480 |
2 |
GMP-WT-002-E |
4 |
0.3-0.55 |
400-580 |
260-377 |
1300x700x2600 |
800 |
2 |
GMP-WT-002-F |
5 |
0.3-0.55 |
500-730 |
225-330 |
1600x800x2800 |
1100 |
2.5 |
GMP-WT-002-G |
5 |
0.3-0.55 |
750-925 |
370-416 |
1750x900x3000 |
1200 |
2.5 |
GMP-WT-002-H |
5 |
0.3-0.55 |
1000-1680 |
450-756 |
1850x1000x3200 |
1500 |
2.5 |
GMP-WT-002-I |
5 |
0.3-0.55 |
1500-2280 |
675-1030 |
2040x1050x3800 |
2500 |
4 |
GMP-WT-002-J |
5 |
0.3-0.55 |
2000-3270 |
900-1470 |
2700x1200x4100 |
2800 |
4 |
GMP-WT-002-K |
6 |
0.3-0.55 |
3000-4900 |
750-1225 |
3100x1300x4200 |
5600 |
6 |
GMP-WT-002-L |
6 |
0.3-0.55 |
4000-5800 |
1200-1700 |
3600x1300x4400 |
6300 |
6 |
GMP-WT-002-M |
8 |
0.3-0.55 |
5000-8500 |
400-680 |
6000x1800x4600 |
9000 |
8 |
Products>Sterile>Bottle Washing Machine>
Products>Sterile>Bottle Washing Machine>
Solution Service |
|
Service
|
Process Design and Engineering
|
|
|
Process Utilities
|
System
|
Products>Sterile>Bottle Washing Machine>
Process & Control
Process |
Milestone |
Joint control |
Internal control |
Administration |
Signing Contract |
Marketing |
Localization |
Expanding | |||
Contacting | |||
Record | |||
URS | Check and Evaluation on Technical Specification and Commercial Terms |
||
Design Specification |
Lay out Arrangement |
||
Approval by QC |
|||
Contract |
Establish | ||
Audit | |||
Storage | |||
Design Qualification |
Confirm the Design According with URS and Relevant National Standard and Criterion |
||
Management Information System | Sorting and Storage of Information |
||
Quality control |
Pre-Validation |
Purchasing |
According with URS and Relevant National Standard and Criterion |
Manufacturing |
According with URS and Relevant National Standard and Criterion |
||
Qualification |
IQ CAL OQ PQ | ||
Technical |
Validation |
Production |
FAT Report and Product Training |
Delivery |
Dismantic the Unit,Pack&Ship the Unit |
||
Installation |
Site Installation and Utility Connection |
||
Operation | SAT Report SAT |
||
Revalidation |
Product Training |
||
After Sales |
Service |
Support |
Equipment Specification and Technical Support |
Training |
Technical Support |
||
Maintenance |
Technical Support |
Products>Sterile>Bottle Washing Machine>
Validation | |
CGMP qualification consultation
|
Establishment of quality system
|
Validation service
|
CGMP training
|
Products>Sterile>Bottle Washing Machine>
Documentation |
Validation Standard
|
Products>Sterile>Bottle Washing Machine>
Air Handling Unit
Combined air conditioner is a relatively new type of air-conditioning products. The unit learn the merits of simitar products home and abroad. It improve a number of tehnical and structural design process, manufacturing and application on the basis of the existing air conditioning unit and equip with a computer-aided design CAD, develop an air conditioner cooling coils, heater thermal calculation software which make the products more advancedand perfect.
The product has the following characteristics:
Structre
- Rational design of the structure:Units usits using the framework of special aluminum alloy materiats, aluminum alloy materiats is a closed inner-empty section. have good intensity, heat preservation and corruption resistance and perfect appearance. Sealing use new plane sealing, seal wall
- Heat preservation panels: Using high pressure to effuse polyurethane heat preservation materials into the tow layers color plates, which single surface is stainless steel, have good intensity, heat preservation and sound insulation, Long using life.
- Easy installation and maintenance convenience.
Performance
- Matched blower using high-quality and high-efficiency double inlet centrifugal fan. Pass the strict mobility and immobility test, which ensure the air conditioner running with the low noise.
- Supporting highly efficient heat exchanger high efficiency heat exchange, low wind and water hinder, with the advanced international level.
- Primary and medium filter support bag filter without slub, large capacity, resistance steady.
Products>Sterile>Bottle Washing Machine>
Ceiling & floor |
Structure: Hidden galvanized steel railsystem fixed with adjustable hangers to civil construction. Panels: Both sides coated steel sheets in grid frame. Filling material can be compressed rockwool or honeycomb. depended on specific requirements. Dimension: Thickness 50mm width 1200mm(variable) length 3600mm (variable) The coated steel sheets consist of sendzimir galvanized and polyester coated steel plate. The hidden grid structure makes the ceiling completely flush Openings for lighting and filterboxes are cut out and reinforced with tight cappings. |
Products>Sterile>Bottle Washing Machine>
Wallboard
Sandwich wallboard is pleased by perfect appearance, the brightly-colored, novel structure, lightweight and high strength, rapid and easy installation and a wide range of special advantages. Sandwich wallboard model by continuous automatic bonders. Extemal is high-strength material (exp:galvanized color steel plate, stainless steel plate) inner is lightweight insulating materials (flame retardant polystyrene, mineral wool, polyurethane etc). Both of them agglutinate with high strength adhesive and use automatic molding machine adding pressure, cutting side, notch and falling surface then becoming plate. Sandwich wallboard has not only good insulation, thermal insulation, moisture-proof and other physical performance, but also good mechanical properties of the bending and shear. Therefore become greatly welcome the New Architecture Board.
Sandwich wallboard program:
Thickness:20~100mm (standard 50 mm)
Connection:
- Tongue and groove (flush)
- Dismountable with profile
Steel specification:
0.5 mm antirust coated polyester lacquered steel
Technical performance
Board select table
Thick mm | 50 | 75 | 100 | 150 | 200 | 250 |
Weight kg/m2 | 10.00 | 10.45 | 10.90 | 11.80 | 12.70 | 13.60 |
Use span table
Thick mm | 50 | 75 | 100 | 150 | 200 | 250 |
Weight kg/m2 | ||||||
25 | 5.19 | 6.91 | 8.09 | 9.91 | 11.45 | 12.80 |
50 | 3.74 | 4.96 | 5.72 | 7.01 | 8.09 | 9.05 |
100 | 2.53 | 3.49 | 4.05 | 4.95 | 5.72 | 6.40 |
150 | 1.90 | 2.70 | 3.31 | 4.05 | 4.67 | 5.23 |
200 | 1.40 | 2.10 | 2.80 | 3.51 | 4.05 | 4.53 |
The allowed load of each meter-wide plate of varying heights and thickness kg/m
Thick mm | 50 | 75 | 100 | 150 | 200 | 250 |
Weight kg/m2 | ||||||
25 | 5.19 | 6.91 | 8.09 | 9.91 | 11.45 | 12.80 |
50 | 3.74 | 4.96 | 5.72 | 7.01 | 8.09 | 9.05 |
100 | 2.53 | 3.49 | 4.05 | 4.95 | 5.72 | 6.40 |
150 | 1.90 | 2.70 | 3.31 | 4.05 | 4.67 | 5.23 |
200 | 1.40 | 2.10 | 2.80 | 3.51 | 4.05 | 4.53 |
Products>Sterile>Bottle Washing Machine>
Installation & Commissioninc
International standard
GMP has own engineering team, furthermore, all other engineering team and installation eam's cooperation Is welcomed. On request, GMP is capable of despatching the supervisor to ensure the right working way. the guideline and the lntemational standard to meet the requrement of :
- GMP&CGMP
- ISO 9000:2000/14644
- WHO
- FDA
- ECA
- ISPE
- DIN I 、II& III
In time, in budge
Cleanroom project is mostly part of a wider project. Coordination with different disciplines is needed and time schedule should be match. GMP guarantee the installation and commissioning schedule to be in time and in budget. The guarantee can be given because of the full cycle of design, own manufacturing and installation under professional controlling.
Commissioning and Testing
As part of the validation process the testing and commissioning of clean rooms and HVAC should be executed and well documented. GMP design and installation are prepared for proper commissioning and subsequent maintenance and checking. It will accommodate the validation cycte and to help the GMP audit committee for their approval.
Products>Sterile>Bottle Washing Machine>
Water & Looping system
- Meeting with Europe Pharmacopoeia (EP) and USA Pharmacopoeia (USP)
- Purified water (PW)
- Hyper Purified Water (HPW)
- Water For lnjection (WFI)
- Pure steam generator and distribution system
- Clean In Place and Stenilization In Place (CIP/SIP)
- Biology waste treatment system (Biowaste)
- Other non-critical fluid system
- Related reaction tank, storage tank and other equipments including relevant conveying pipeline system